[{"data":1,"prerenderedAt":1066},["ShallowReactive",2],{"kb-en-\u002Fkb\u002Freports\u002Fsmoothing-regions":3,"kb-nav-en":587},{"page":4,"fallback":576},{"id":5,"title":6,"body":7,"date":573,"description":574,"extension":575,"faq":576,"meta":577,"navigation":578,"ogImage":579,"order":580,"path":581,"raw":576,"robots":579,"schemaOrg":579,"seo":582,"sitemap":583,"stem":584,"updated":585,"__hash__":586},"content_en\u002Fkb\u002Freports\u002Fsmoothing-regions.md","Smoothing regions",{"type":8,"value":9,"toc":558},"minimark",[10,20,23,28,32,35,39,42,130,149,153,207,218,222,239,243,246,252,256,305,322,326,333,404,407,411,418,425,439,446,450,507,511,542,546],[11,12,13,14,19],"p",{},"A smoothing region replaces the plate result inside an area with a value that does not\ndepend on the mesh. Put one on a ",[15,16,18],"a",{"href":17},"\u002Fkb\u002Freports\u002Fsingular-points","singular point"," and the\npeak there becomes a number you can design with. It is the standard treatment: the mean\nover a small area, or the value at the column face, rather than the value at the node.",[11,21,22],{},"Smoothing works on results only. It never changes the solve, and with no region set,\nevery result is bit-for-bit what it was.",[24,25,27],"h2",{"id":26},"measured","Measured",[29,30],"diagram-peak-convergence",{"kind":31},"support",[11,33,34],{},"The raw value at the support grew by a quarter on the last halving of the element size.\nThe mean over a 0.4 m circle stayed within 0.7 % across all three meshes.",[24,36,38],{"id":37},"anchors","Where a region sits",[11,40,41],{},"A region is an object in the model, tied to something in it, so it moves when the model\nmoves:",[43,44,45,61],"table",{},[46,47,48],"thead",{},[49,50,51,55,58],"tr",{},[52,53,54],"th",{},"Tied to",[52,56,57],{},"Shape",[52,59,60],{},"Size",[62,63,64,84,95,106,116],"tbody",{},[49,65,66,70,81],{},[67,68,69],"td",{},"A node",[67,71,72,76,77,80],{},[73,74,75],"strong",{},"Circle"," (default) or ",[73,78,79],{},"Rectangle",", which can be turned",[67,82,83],{},"Radius 2 × t; sides 4 × t",[49,85,86,89,92],{},[67,87,88],{},"A column standing on a slab",[67,90,91],{},"Circle where the column meets the slab",[67,93,94],{},"Radius 2 × t",[49,96,97,100,103],{},[67,98,99],{},"A member or wall lying in a plate",[67,101,102],{},"A strip along it",[67,104,105],{},"Strip width 4 × t",[49,107,108,111,114],{},[67,109,110],{},"A plate edge",[67,112,113],{},"A strip along the edge",[67,115,105],{},[49,117,118,121,127],{},[67,119,120],{},"Three or more nodes",[67,122,123,124],{},"A polygon through them, the ",[73,125,126],{},"Corner nodes",[67,128,129],{},"The polygon",[11,131,132,133,136,137,140,141,144,145,148],{},"Here t is the plate thickness. The sizes are defaults: type a value into ",[73,134,135],{},"Radius",",\n",[73,138,139],{},"Side a",", ",[73,142,143],{},"Side b"," or ",[73,146,147],{},"Strip width"," to override one.",[24,150,152],{"id":151},"methods","Methods",[43,154,155,165],{},[46,156,157],{},[49,158,159,162],{},[52,160,161],{},"Method",[52,163,164],{},"What it does",[62,166,167,177,187,197],{},[49,168,169,174],{},[67,170,171],{},[73,172,173],{},"Average",[67,175,176],{},"The area mean of the element results over the region. A strip averages across its width only, so a support moment along a wall keeps its variation along the wall.",[49,178,179,184],{},[67,180,181],{},[73,182,183],{},"Ring fit",[67,185,186],{},"Fits a linear field in a ring just outside the region and carries it inside, keeping the slope.",[49,188,189,194],{},[67,190,191],{},[73,192,193],{},"Face value",[67,195,196],{},"The value at the region's boundary. At a column, that is the moment at its face, in the spirit of EN 1992-1-1 §5.3.2.2(4).",[49,198,199,204],{},[67,200,201],{},[73,202,203],{},"Zero",[67,205,206],{},"Clears the inside of a column. Offered on a region, not in the project rule.",[11,208,209,211,212,214,215,217],{},[73,210,173],{}," suits a point support or a point load you keep as a point. ",[73,213,193],{},"\nsuits a column, where the design moment is taken at the face. ",[73,216,183],{}," keeps a\ngradient across the region that an average would flatten.",[24,219,221],{"id":220},"components","Components",[11,223,224,226,227,230,231,234,235,238],{},[73,225,221],{}," decides what a region smooths: ",[73,228,229],{},"Moments"," (the default), ",[73,232,233],{},"Moments and\nshears",", which adds the transverse shears, or ",[73,236,237],{},"All",". Anything not selected is shown\nraw inside the region.",[24,240,242],{"id":241},"how-it-works","How it is applied",[11,244,245],{},"Smoothing is applied to each load case before combination. Combinations are then exact,\nbecause a combination of smoothed cases is the same as smoothing the combination, and\nenvelopes are taken from the smoothed combinations afterwards.",[11,247,248,251],{},[73,249,250],{},"Refine the mesh inside"," is checked on every new region. The mesh inside the region is\nthen refined, so the average is taken over a real area rather than over whatever few\nelements happen to touch it. Uncheck it to leave the mesh alone.",[24,253,255],{"id":254},"adding","Adding one",[257,258,259,270,278,286,295],"ul",{},[260,261,262,265,266,269],"li",{},[73,263,264],{},"Right-click a singular point"," and choose ",[73,267,268],{},"Smooth the peak here",".",[260,271,272,265,275,269],{},[73,273,274],{},"Right-click a node or a member",[73,276,277],{},"Add smoothing region",[260,279,280,265,283,269],{},[73,281,282],{},"Right-click a plate edge",[73,284,285],{},"Add smoothing region on this edge",[260,287,288,291,292,269],{},[73,289,290],{},"Select three or more nodes",", right-click and choose ",[73,293,294],{},"Smoothing region through …\nselected nodes",[260,296,297,298,300,301,304],{},"In the properties of a node, member or plate, the ",[73,299,6],{}," section lists\nthe regions on it, with an ",[73,302,303],{},"Add"," button.",[11,306,307,308,310,311,313,314,317,318,321],{},"Select a region to edit its size, ",[73,309,161],{}," and ",[73,312,221],{},". Method and components\ndefault to ",[73,315,316],{},"Project (…)",", which follows the project rule below. To delete a region,\nright-click it and choose ",[73,319,320],{},"Delete smoothing region",", or select it and delete it.",[24,323,325],{"id":324},"project-rule","The project rule",[11,327,328,329,332],{},"Instead of placing regions one by one, you can have the project smooth every singular\npeak. ",[73,330,331],{},"Project settings › Results › Plate results › Peak smoothing at singular points",":",[43,334,335,348],{},[46,336,337],{},[49,338,339,342,345],{},[52,340,341],{},"Setting",[52,343,344],{},"Options",[52,346,347],{},"Default",[62,349,350,367,379,391],{},[49,351,352,357,365],{},[67,353,354],{},[73,355,356],{},"Peak smoothing at singular points",[67,358,359,140,362],{},[73,360,361],{},"Off",[73,363,364],{},"Points, corners and column heads",[67,366,361],{},[49,368,369,374,377],{},[67,370,371],{},[73,372,373],{},"Smoothing method",[67,375,376],{},"Average, Ring fit, Face value",[67,378,173],{},[49,380,381,386,389],{},[67,382,383],{},[73,384,385],{},"Smoothed components",[67,387,388],{},"Moments, Moments and shears, All",[67,390,229],{},[49,392,393,398,401],{},[67,394,395],{},[73,396,397],{},"Radius × thickness",[67,399,400],{},"Radius of each automatic region, as a multiple of the plate thickness",[67,402,403],{},"2",[11,405,406],{},"With the rule on, every point load, point support, column and re-entrant corner is\nsmoothed, and the face value is taken at every rigid column head. A column without a head\nis smoothed over the circle round its cross-section: half its diagonal plus half the slab\nthickness. An elastic head needs nothing: the slab bends over the column, and its field is\nthe design field.",[24,408,410],{"id":409},"viewer","In the viewer",[11,412,413,414,417],{},"Smoothed areas are hatched in teal on the plate as drawn, on the top face of a 3D slab\nor the mid-plane of a flat one, and they follow the deformed shape. Pins and the value\nreadout give the ",[73,415,416],{},"unsmoothed peak"," beside the smoothed value.",[11,419,420,421,424],{},"Two switches in each viewer's ",[73,422,423],{},"Display"," sheet:",[257,426,427,433],{},[260,428,429,432],{},[73,430,431],{},"Smoothed peaks"," shows smoothed results when on, the default, and raw results when off.",[260,434,435,438],{},[73,436,437],{},"Smoothing areas"," shows or hides the hatching. It is on in model views and off in\nresult views.",[440,441],"kb-figure",{"alt":442,"caption":443,"meta":444,"src":445},"Result readout inside a teal smoothing circle showing the smoothed value and the unsmoothed peak","Hovering the column without a head, covered by a 0.6 m smoothing circle: smoothed mₓ −117.9 kNm\u002Fm, with the unsmoothed peak of −163.7 kNm\u002Fm beside it, and Smoothed (average): Column.","ULS (EN 1990 6.10)","\u002Fkb\u002Fsmoothing-region.png",[24,447,449],{"id":448},"defaults","Defaults",[43,451,452,460],{},[46,453,454],{},[49,455,456,458],{},[52,457],{},[52,459,347],{},[62,461,462,469,477,485,492,499],{},[49,463,464,467],{},[67,465,466],{},"Project rule",[67,468,361],{},[49,470,471,474],{},[67,472,473],{},"Method, components",[67,475,476],{},"Average, moments",[49,478,479,482],{},[67,480,481],{},"Radius of a circle",[67,483,484],{},"2 × plate thickness",[49,486,487,489],{},[67,488,250],{},[67,490,491],{},"On",[49,493,494,497],{},[67,495,496],{},"Smoothed peaks in a viewer",[67,498,491],{},[49,500,501,504],{},[67,502,503],{},"Smoothing areas drawn",[67,505,506],{},"In model views; hidden in result views",[24,508,510],{"id":509},"off","Turning it off",[257,512,513,525,531],{},[260,514,515,518,519,521,522,524],{},[73,516,517],{},"For one viewer",": switch ",[73,520,431],{}," off in its ",[73,523,423],{}," sheet. The regions\nstay; the viewer shows raw results.",[260,526,527,530],{},[73,528,529],{},"For one region",": delete it.",[260,532,533,536,537,539,540,269],{},[73,534,535],{},"For the automatic regions",": set ",[73,538,356],{}," to ",[73,541,361],{},[24,543,545],{"id":544},"limits","What it does not do",[257,547,548,551],{},[260,549,550],{},"It does not correct a wrong model. If the peak is wrong because a support or a load is\nwrong, a smoothed value is the same mistake averaged.",[260,552,553,554,269],{},"Smoothing regions are not carried by ",[15,555,557],{"href":556},"\u002Fkb\u002Freports\u002Fifc","IFC export",{"title":559,"searchDepth":560,"depth":560,"links":561},"",2,[562,563,564,565,566,567,568,569,570,571,572],{"id":26,"depth":560,"text":27},{"id":37,"depth":560,"text":38},{"id":151,"depth":560,"text":152},{"id":220,"depth":560,"text":221},{"id":241,"depth":560,"text":242},{"id":254,"depth":560,"text":255},{"id":324,"depth":560,"text":325},{"id":409,"depth":560,"text":410},{"id":448,"depth":560,"text":449},{"id":509,"depth":560,"text":510},{"id":544,"depth":560,"text":545},"2026-10-21","Average, ring fit or face value over a region at a column, point load or corner, applied per load case, for plate design values that converge.","md",false,{},true,null,1.6,"\u002Fkb\u002Freports\u002Fsmoothing-regions",{"title":6,"description":574},{"loc":581},"kb\u002Freports\u002Fsmoothing-regions","2026-11-05","E_w-jLh32k1zvYcN38gmBuGiVxh9K1gB_nCqaWNjF6U",{"sections":588,"extras":965,"flat":978},[589,624,683,706,749,780,823,869,896,923,938],{"path":590,"slug":591,"title":592,"description":593,"icon":594,"articles":595},"\u002Fkb\u002Fgetting-started","getting-started","Getting started","From an empty tab to a solved, checked structure — the three guides that get you productive in Elementarium.","lucide:rocket",[596,600,604,608,612,616,620],{"path":597,"title":598,"description":599,"translated":578},"\u002Fkb\u002Fgetting-started\u002Fkeyboard-shortcuts","Keyboard shortcuts","Every key binding in the workspace, the pointer gestures in the viewports, what the number fields accept, and what the command palette understands.",{"path":601,"title":602,"description":603,"translated":578},"\u002Fkb\u002Fgetting-started\u002Fquickstart","Quickstart","Build a portal frame, load it, solve it and read the bending moment diagram — about ten minutes from an empty tab.",{"path":605,"title":606,"description":607,"translated":578},"\u002Fkb\u002Fgetting-started\u002Fscope-and-limits","Scope and limits","What Elementarium models, solves and checks today, and what it does not — on one page, before you commit a job to it.",{"path":609,"title":610,"description":611,"translated":578},"\u002Fkb\u002Fgetting-started\u002Fsystem-requirements","System requirements","Which browsers and devices run Elementarium, how threading affects solve speed, and where the practical ceiling on model size comes from.",{"path":613,"title":614,"description":615,"translated":578},"\u002Fkb\u002Fgetting-started\u002Finterface-tour","Tour of the workspace","The ribbon, properties panel, dockable viewports, table dock, command palette, status bar and settings — what each part of the editor is for.",{"path":617,"title":618,"description":619,"translated":578},"\u002Fkb\u002Fgetting-started\u002Funits","Units","How units work in Elementarium — SI inside, your unit system on screen — and the handful of conversions that cause most wrong answers in structural models.",{"path":621,"title":622,"description":623,"translated":578},"\u002Fkb\u002Fgetting-started\u002Ffirst-analysis","Your first analysis","Load cases, combinations and a linear static solve — then how to decide whether the answer is trustworthy.",{"path":625,"slug":626,"title":627,"description":628,"icon":629,"articles":630},"\u002Fkb\u002Fmodeling","modeling","Modeling","Bars, beams, 3D frames, slabs and walls. Geometry, sections, supports and releases that behave like the real structure.","lucide:frame",[631,635,639,643,647,651,655,659,663,667,671,675,679],{"path":632,"title":633,"description":634,"translated":578},"\u002Fkb\u002Fmodeling\u002Fbars-beams-and-trusses","Bars, beams and trusses","When a member should be a bar and when a beam, how to model trusses and bracing, and what to do about members that only work in tension.",{"path":636,"title":637,"description":638,"translated":578},"\u002Fkb\u002Fmodeling\u002Fcolumn-heads","Column heads","A column or point support acting on a slab over its real footprint, elastic, rigid or stiff, so the moment at the column face converges.",{"path":640,"title":641,"description":642,"translated":578},"\u002Fkb\u002Fmodeling\u002Fdrawings-and-snapping","Drawings & snapping","Importing a DXF as a reference underlay, choosing its units and plane, and snapping model geometry onto it accurately.",{"path":644,"title":645,"description":646,"translated":578},"\u002Fkb\u002Fmodeling\u002Felastic-foundations","Elastic foundations","Grade beams, strip footings and walls on ground as line supports on springs — choosing a subgrade modulus, and where the model stops being true.",{"path":648,"title":649,"description":650,"translated":578},"\u002Fkb\u002Fmodeling\u002Fhinges","Hinges","A hinge anywhere along a member, releases at a node, line hinges on plate edges and beams, connected crossings, scissor hinges, hinge results and export.",{"path":652,"title":653,"description":654,"translated":578},"\u002Fkb\u002Fmodeling\u002Fplane-frames-in-3d","Plane frames in a 3D solver","When to use the 2D Frame and 2D Truss model types, why a flat structure in a 3D model is a mechanism, and how to restrain it.",{"path":656,"title":657,"description":658,"translated":578},"\u002Fkb\u002Fmodeling\u002Fribbed-slabs","Ribbed slabs","Ribs that work with their slab as T-beams — the eccentric web, T-section forces, effective widths to EN 1992, EN 1994, ACI 318 and AISC 360.",{"path":660,"title":661,"description":662,"translated":578},"\u002Fkb\u002Fmodeling\u002Fsections-and-materials","Sections & materials","What a section and a material contribute to the stiffness matrix and the design checks, and the values worth checking twice.",{"path":664,"title":665,"description":666,"translated":578},"\u002Fkb\u002Fmodeling\u002Fsurfaces","Slabs, walls and shells","Modelling surfaces in Elementarium — outlines, openings and thickness, how a beam or a wall attaches to a slab, local axes, and what a surface result means.",{"path":668,"title":669,"description":670,"translated":578},"\u002Fkb\u002Fmodeling\u002Fcopy-paste-and-snap","Snap, copy and paste","Object snap to nodes, midpoints, crossings and plate centres; copying geometry by a base node so the paste joins the model; pasting loads onto targets.",{"path":672,"title":673,"description":674,"translated":578},"\u002Fkb\u002Fmodeling\u002Fstructure-generators","Structure generators","Thirty-six parametric structures — trusses, frames, arches, towers, domes and shells — generated from a few dimensions, with supports and loads.",{"path":676,"title":677,"description":678,"translated":578},"\u002Fkb\u002Fmodeling\u002Fsupports-and-releases","Supports & releases","Pins, fixities, springs and end releases — what each one does to the stiffness matrix, and when each is right.",{"path":680,"title":681,"description":682,"translated":578},"\u002Fkb\u002Fmodeling\u002Ffirst-model","Your first model","The modeling loop end to end — geometry, sections, supports and releases — on a structure small enough to check by hand.",{"path":684,"slug":685,"title":686,"description":687,"icon":688,"articles":689},"\u002Fkb\u002Fmeshing","meshing","Meshing","Mesh density, local refinement and the quality checks that tell you when a mesh is fine enough to trust.","lucide:grid-3x3",[690,694,698,702],{"path":691,"title":692,"description":693,"translated":578},"\u002Fkb\u002Fmeshing\u002Felement-size","Choosing element size","Starting mesh densities for slabs, walls and rafts, and the convergence test that decides whether a mesh is fine enough.",{"path":695,"title":696,"description":697,"translated":578},"\u002Fkb\u002Fmeshing\u002Frefinement","Local refinement","Where to spend elements, where not to bother, and how to refine without wrecking element shape.",{"path":699,"title":700,"description":701,"translated":578},"\u002Fkb\u002Fmeshing\u002Fquality-checks","Mesh quality","Aspect ratio, skew and warping — what degrades a result, what the mesher reports, and how to tell whether the elements you are worried about matter.",{"path":703,"title":704,"description":705,"translated":578},"\u002Fkb\u002Fmeshing\u002Fmesh-refinements","Mesh refinements","Refinement zones tied to the model, round a node or column, along a member or edge, or through a polygon, holding a target element size inside.",{"path":707,"slug":708,"title":709,"description":710,"icon":711,"articles":712},"\u002Fkb\u002Floads","loads","Loads & combinations","Build load cases, generate code combinations automatically and find out which one actually governs.","lucide:arrow-down-to-line",[713,717,721,725,729,733,737,741,745],{"path":714,"title":715,"description":716,"translated":578},"\u002Fkb\u002Floads\u002Fasce-7-combinations","ASCE 7 combinations","LRFD and ASD combinations to ASCE 7-22 — how the generator maps your load groups onto D, L, Lr, S, W and E, and pairing them with the AISC check.",{"path":718,"title":719,"description":720,"translated":578},"\u002Fkb\u002Floads\u002Fcombinations","Automatic combinations","Generating EN 1990 and ASCE 7 combinations, understanding the equations behind them, and reading the generated set critically.",{"path":722,"title":723,"description":724,"translated":578},"\u002Fkb\u002Floads\u002Fenvelopes","Envelopes","Extracting the governing value across dozens of combinations without reading every one — and the traps in doing so.",{"path":726,"title":727,"description":728,"translated":578},"\u002Fkb\u002Floads\u002Fload-cases","Load cases","Actions, self-weight, imposed loads and load arrangements — how to build cases that stay separable.",{"path":730,"title":731,"description":732,"translated":578},"\u002Fkb\u002Floads\u002Fload-panels","Load panels","Areas that hand a floor, roof or wall pressure to the members around them as line loads, one way or two way, without meshing a slab.",{"path":734,"title":735,"description":736,"translated":578},"\u002Fkb\u002Floads\u002Fpoint-load-contact-area","Spreading a point load","A point load on a plate acting over a rectangle or circle, dispersed at 45° to the mid-plane (EN 1991-2 §4.3.6), so the moment under it converges.",{"path":738,"title":739,"description":740,"translated":578},"\u002Fkb\u002Floads\u002Fsettlements","Support settlements","Prescribed displacements and rotations at supported nodes and line supports, scaled by the combination factor, and why an unsupported direction is ignored.",{"path":742,"title":743,"description":744,"translated":578},"\u002Fkb\u002Floads\u002Ftemperature-loads","Temperature loads","Uniform temperature change and through-depth gradients — what each does to a free and a restrained structure, and the coefficients to use.",{"path":746,"title":747,"description":748,"translated":578},"\u002Fkb\u002Floads\u002Fwind-and-snow","Wind and snow","Wind to EN 1991-1-4 and snow to EN 1991-1-3, generated on a building envelope — site inputs, recognised roof shapes, the cases produced, and the limits.",{"path":750,"slug":751,"title":752,"description":753,"icon":754,"articles":755},"\u002Fkb\u002Fanalysis","analysis","Analysis types","Linear static, modal, linear buckling and second-order — what each analysis assumes, what it returns and how to read the result.","lucide:activity",[756,760,764,768,772,776],{"path":757,"title":758,"description":759,"translated":578},"\u002Fkb\u002Fanalysis\u002Fsolvers","Choosing a linear solver","Conjugate gradients with Jacobi, incomplete Cholesky or multigrid, or a direct factorisation — what each does, how to watch it, and when the choice matters.",{"path":761,"title":762,"description":763,"translated":578},"\u002Fkb\u002Fanalysis\u002Fbuckling","Linear buckling","Critical load factors and buckling shapes — what α_cr means, why it is an upper bound, and how to use it for second-order effects.",{"path":765,"title":766,"description":767,"translated":578},"\u002Fkb\u002Fanalysis\u002Flinear-static","Linear static analysis","The workhorse analysis — what K u = f actually assumes, what it returns, and where linearity stops being a reasonable model.",{"path":769,"title":770,"description":771,"translated":578},"\u002Fkb\u002Fanalysis\u002Fmodal","Modal analysis","Natural frequencies and mode shapes — mass modelling, participation factors and what the numbers are good for.",{"path":773,"title":774,"description":775,"translated":578},"\u002Fkb\u002Fanalysis\u002Fsecond-order","Second-order analysis","P-Δ and P-δ solved by iteration, geometric imperfections to EN 1993-1-1 §5.3, and why a second-order result cannot be superposed.",{"path":777,"title":778,"description":779,"translated":578},"\u002Fkb\u002Fanalysis\u002Fverification","Verifying the solver","Closed-form cases you can build in ten minutes to test the solver — beams, frames, columns, plates, frequencies — with the expected error of each.",{"path":781,"slug":782,"title":783,"description":784,"icon":785,"articles":786},"\u002Fkb\u002Fdesign-checks","design-checks","Design checks","Utilisation ratios, governing cases and the clause behind every number a check reports.","lucide:clipboard-check",[787,791,795,799,803,807,811,815,819],{"path":788,"title":789,"description":790,"translated":578},"\u002Fkb\u002Fdesign-checks\u002Fcold-formed","Cold-formed C and Z members — EN 1993-1-3","Cold-formed C and Z members and purlins to EN 1993-1-3 — the effective section, cross-section and member resistance, purlins held by sheeting, and what is left to you.",{"path":792,"title":793,"description":794,"translated":578},"\u002Fkb\u002Fdesign-checks\u002Fforces-by-hand","Forces entered by hand","Check a member with no analysis or no model, or type over what the analysis gave, and what the row, sheet and report say about it.",{"path":796,"title":797,"description":798,"translated":578},"\u002Fkb\u002Fdesign-checks\u002Fnational-annexes","National annexes","Where nationally determined parameters change the answer, how to select the right annex, and what to state in the report.",{"path":800,"title":801,"description":802,"translated":578},"\u002Fkb\u002Fdesign-checks\u002Fsection-classification","Section classification","How EN 1993-1-1 Table 5.2 classifies a steel section, why the class depends on the combination, and what the check does with a section it cannot classify.",{"path":804,"title":805,"description":806,"translated":578},"\u002Fkb\u002Fdesign-checks\u002Fserviceability","Serviceability checks","Deflection, drift and floor frequency checked member by member at SLS, to the national annexes, EN 1993-1-4, IBC, AISC or EN 1995-1-1.",{"path":808,"title":809,"description":810,"translated":578},"\u002Fkb\u002Fdesign-checks\u002Fstainless","Stainless steel — EN 1993-1-4","Stainless member resistance and deflection to EN 1993-1-4 — how a material is read as stainless, what is checked, and what is left to you.",{"path":812,"title":813,"description":814,"translated":578},"\u002Fkb\u002Fdesign-checks\u002Faisc","Steel — AISC 360","Member strength to Chapters D to H, LRFD or ASD — compression buckling, lateral-torsional buckling and every C_b option written down.",{"path":816,"title":817,"description":818,"translated":578},"\u002Fkb\u002Fdesign-checks\u002Fsteel","Steel — EN 1993-1-1","Member resistance to §6.2 and §6.3 — what is checked at every station, where buckling lengths and M_cr come from, and the clauses left to you — with haunched members, cold-formed C and Z members and fire resistance.",{"path":820,"title":821,"description":822,"translated":578},"\u002Fkb\u002Fdesign-checks\u002Ffire","Steel in fire — EN 1993-1-2","Fire resistance of carbon steel members to EN 1993-1-2 — the steel temperature at the required time, the resistances at that temperature, the critical temperature, and what is left to you.",{"path":824,"slug":825,"title":826,"description":827,"icon":828,"articles":829},"\u002Fkb\u002Freports","reports","Results & reports","Diagrams, contours and tables in the viewport, and the calculation package you hand to a reviewer.","lucide:file-chart-column",[830,834,837,841,845,848,852,856,860,864,865],{"path":831,"title":832,"description":833,"translated":578},"\u002Fkb\u002Freports\u002Fexporting","Exporting a report","Assembling a calculation package a reviewer can follow — inputs, model, results and checks, in the order a calc package should be.",{"path":556,"title":835,"description":836,"translated":578},"IFC structural models","The IFC structural analysis view in and out — what IFC2X3, IFC4 and IFC4X3 files bring, what an export carries, and what IFC cannot say.",{"path":838,"title":839,"description":840,"translated":578},"\u002Fkb\u002Freports\u002Fexchange","Import & export formats","IFC structural models and SAF workbooks in and out, DXF as a reference drawing, result tables as CSV or xlsx, and an OOFEM input deck.",{"path":842,"title":843,"description":844,"translated":578},"\u002Fkb\u002Freports\u002Freading-diagrams","Reading diagrams","Bending, shear and axial diagrams, contour plots and deformed shapes — the conventions behind what you are looking at.",{"path":17,"title":846,"description":847,"translated":578},"Reading singular points","Why the peak at a column, a point load or a re-entrant corner grows with the mesh, how plate results mark those points, and what to do at each.",{"path":849,"title":850,"description":851,"translated":578},"\u002Fkb\u002Freports\u002Freport-formats","Report formats","The report typeset as a PDF with a live preview, as PDF\u002FA-2b for archiving, or as an editable Word file, in English or Czech.",{"path":853,"title":854,"description":855,"translated":578},"\u002Fkb\u002Freports\u002Fresult-tables","Result tables","Filtering, sorting and extracting numbers — getting the value you need out of a solved model without scrolling.",{"path":857,"title":858,"description":859,"translated":578},"\u002Fkb\u002Freports\u002Freviewing","Reviewing a calculation","For the checking engineer — how to interrogate a model you did not build, what the report guarantees, and the questions to ask first.",{"path":861,"title":862,"description":863,"translated":578},"\u002Fkb\u002Freports\u002Fsection-cuts","Section cuts","A line drawn across a slab, the plate result charted along it, and the moment, shear or normal force the line carries, integrated over its length.",{"path":581,"title":6,"description":574,"translated":578},{"path":866,"title":867,"description":868,"translated":578},"\u002Fkb\u002Freports\u002Fviewers","Viewers, colour scales and maps","The viewer strip and switches, the result board, tabs or tiles, linked viewers, legend limits, colour maps and plate results drawn as a 3D surface.",{"path":870,"slug":871,"title":872,"description":873,"icon":874,"articles":875},"\u002Fkb\u002Fcollaboration","collaboration","Collaboration & sync","Shared models, real-time editing, and offline edits that merge cleanly when you reconnect.","lucide:users-round",[876,880,884,888,892],{"path":877,"title":878,"description":879,"translated":578},"\u002Fkb\u002Fcollaboration\u002Fcomments","Comments","Threads pinned to nodes, members, plates or points, @mentions, blocking comments that hold up a report, and the notifications they send.",{"path":881,"title":882,"description":883,"translated":578},"\u002Fkb\u002Fcollaboration\u002Fsharing-projects","Sharing a project","Inviting people to a model, what each role can do, and how to coordinate two engineers in the same structure.",{"path":885,"title":886,"description":887,"translated":578},"\u002Fkb\u002Fcollaboration\u002Fversion-history","Version history","Automatic checkpoints and named versions — how long they are kept, previewing an earlier state, and restoring it in place or as a new project.",{"path":889,"title":890,"description":891,"translated":578},"\u002Fkb\u002Fcollaboration\u002Fdevices","Working across devices","One account on every device — how a project follows you from desk to laptop, tablet or phone, and what changes on a small screen.",{"path":893,"title":894,"description":895,"translated":578},"\u002Fkb\u002Fcollaboration\u002Fworking-offline","Working offline","What keeps working with no connection, what needs one, how a session and a project survive without a signal, and how offline edits merge when you come back.",{"path":897,"slug":898,"title":899,"description":900,"icon":901,"articles":902},"\u002Fkb\u002Ftheory","theory","Theory notes","The mechanics inside the solver — element formulations, sign conventions, numerical assumptions and their limits.","lucide:sigma",[903,907,911,915,919],{"path":904,"title":905,"description":906,"translated":578},"\u002Fkb\u002Ftheory\u002Felement-formulations","Element formulations","Degrees of freedom, interpolation and limits for every element type in the solver — what each one can represent and what it cannot.",{"path":908,"title":909,"description":910,"translated":578},"\u002Fkb\u002Ftheory\u002Fglossary","Glossary","Finite element and structural terms as Elementarium uses them, from degrees of freedom to MITC4 and utilisation, each linked to its page.",{"path":912,"title":913,"description":914,"translated":578},"\u002Fkb\u002Ftheory\u002Fsign-conventions","Sign conventions","Axes, positive directions and how to read a diagram without guessing — the page that prevents most result confusion.",{"path":916,"title":917,"description":918,"translated":578},"\u002Fkb\u002Ftheory\u002Fdirect-stiffness-method","The direct stiffness method","How a finite element solver turns a model into K u = f and back — stiffness, transformation, assembly, constraints, solution and recovery.",{"path":920,"title":921,"description":922,"translated":578},"\u002Fkb\u002Ftheory\u002Fwinkler-foundations","Winkler foundations","The bedding model behind elastic foundations — what it assumes, how to choose a modulus, and precisely where the idealisation stops being true.",{"path":924,"slug":925,"title":926,"description":927,"icon":928,"articles":929},"\u002Fkb\u002Ftroubleshooting","troubleshooting","Troubleshooting","Solver errors, unstable models and results that look wrong — with the usual causes listed first.","lucide:life-buoy",[930,934],{"path":931,"title":932,"description":933,"translated":578},"\u002Fkb\u002Ftroubleshooting\u002Fsolver-errors","Solver errors","What each class of solver message means, what usually causes it, and what to do next.",{"path":935,"title":936,"description":937,"translated":578},"\u002Fkb\u002Ftroubleshooting\u002Fsingular-stiffness-matrix","Why the solver reports a singular stiffness matrix","The most common solver failure — what singularity means mechanically, the six causes in order of frequency, and how to find yours in minutes.",{"path":939,"slug":940,"title":941,"description":942,"icon":943,"articles":944},"\u002Fkb\u002Faccount","account","Account & billing","Plans, limits, invoices, and what happens to your projects when a subscription ends.","lucide:credit-card",[945,949,953,957,961],{"path":946,"title":947,"description":948,"translated":578},"\u002Fkb\u002Faccount\u002Finvoices","Invoices & VAT","Billing details, receipts, VAT handling and how to get an invoice your accounts department will accept.",{"path":950,"title":951,"description":952,"translated":578},"\u002Fkb\u002Faccount\u002Fcancelling","Pausing or cancelling","How to stop paying without losing your work — what happens to projects, reports and history when a subscription ends.",{"path":954,"title":955,"description":956,"translated":578},"\u002Fkb\u002Faccount\u002Fplans","Plans & limits","What the free plan includes, what Pro adds, and how the caps are actually measured.",{"path":958,"title":959,"description":960,"translated":578},"\u002Fkb\u002Faccount\u002Fstudent","Student accounts","A larger free tier for students and researchers — verify an academic email address, what it unlocks, and why it is re-confirmed every year.",{"path":962,"title":963,"description":964,"translated":578},"\u002Fkb\u002Faccount\u002Ftwo-factor","Two-factor authentication","Signing in with an authenticator code as well as your password, recovery codes, turning it off, and Google sign-in on an account that has a password.",[966,970,974],{"path":967,"title":968,"description":969,"translated":578},"\u002Fkb\u002Ffaq","Frequently asked questions","The questions engineers ask before they trust a new structural analysis package — answered directly.",{"path":971,"title":972,"description":973,"translated":578},"\u002Fkb\u002Frelease-notes","Release notes","Every Elementarium release, newest first: what shipped in the tab, and what it changes in your models.",{"path":975,"title":976,"description":977,"translated":578},"\u002Fkb\u002Fall","All articles","Every article in the Elementarium knowledge base, grouped by section.",[979,980,981,982,983,984,985,986,987,988,989,990,991,992,993,994,995,996,997,998,999,1000,1001,1002,1003,1004,1005,1006,1007,1008,1009,1010,1011,1012,1013,1014,1015,1016,1017,1018,1019,1020,1021,1022,1023,1024,1025,1026,1027,1028,1029,1030,1031,1032,1033,1034,1035,1036,1037,1038,1039,1040,1041,1042,1043,1044,1045,1046,1047,1048,1049,1050,1051,1052,1053,1054,1055,1056,1057,1058,1059,1060,1061,1062,1063,1064,1065],{"path":590,"title":592,"description":593,"translated":578},{"path":597,"title":598,"description":599,"translated":578},{"path":601,"title":602,"description":603,"translated":578},{"path":605,"title":606,"description":607,"translated":578},{"path":609,"title":610,"description":611,"translated":578},{"path":613,"title":614,"description":615,"translated":578},{"path":617,"title":618,"description":619,"translated":578},{"path":621,"title":622,"description":623,"translated":578},{"path":625,"title":627,"description":628,"translated":578},{"path":632,"title":633,"description":634,"translated":578},{"path":636,"title":637,"description":638,"translated":578},{"path":640,"title":641,"description":642,"translated":578},{"path":644,"title":645,"description":646,"translated":578},{"path":648,"title":649,"description":650,"translated":578},{"path":652,"title":653,"description":654,"translated":578},{"path":656,"title":657,"description":658,"translated":578},{"path":660,"title":661,"description":662,"translated":578},{"path":664,"title":665,"description":666,"translated":578},{"path":668,"title":669,"description":670,"translated":578},{"path":672,"title":673,"description":674,"translated":578},{"path":676,"title":677,"description":678,"translated":578},{"path":680,"title":681,"description":682,"translated":578},{"path":684,"title":686,"description":687,"translated":578},{"path":691,"title":692,"description":693,"translated":578},{"path":695,"title":696,"description":697,"translated":578},{"path":699,"title":700,"description":701,"translated":578},{"path":703,"title":704,"description":705,"translated":578},{"path":707,"title":709,"description":710,"translated":578},{"path":714,"title":715,"description":716,"translated":578},{"path":718,"title":719,"description":720,"translated":578},{"path":722,"title":723,"description":724,"translated":578},{"path":726,"title":727,"description":728,"translated":578},{"path":730,"title":731,"description":732,"translated":578},{"path":734,"title":735,"description":736,"translated":578},{"path":738,"title":739,"description":740,"translated":578},{"path":742,"title":743,"description":744,"translated":578},{"path":746,"title":747,"description":748,"translated":578},{"path":750,"title":752,"description":753,"translated":578},{"path":757,"title":758,"description":759,"translated":578},{"path":761,"title":762,"description":763,"translated":578},{"path":765,"title":766,"description":767,"translated":578},{"path":769,"title":770,"description":771,"translated":578},{"path":773,"title":774,"description":775,"translated":578},{"path":777,"title":778,"description":779,"translated":578},{"path":781,"title":783,"description":784,"translated":578},{"path":788,"title":789,"description":790,"translated":578},{"path":792,"title":793,"description":794,"translated":578},{"path":796,"title":797,"description":798,"translated":578},{"path":800,"title":801,"description":802,"translated":578},{"path":804,"title":805,"description":806,"translated":578},{"path":808,"title":809,"description":810,"translated":578},{"path":812,"title":813,"description":814,"translated":578},{"path":816,"title":817,"description":818,"translated":578},{"path":820,"title":821,"description":822,"translated":578},{"path":824,"title":826,"description":827,"translated":578},{"path":831,"title":832,"description":833,"translated":578},{"path":556,"title":835,"description":836,"translated":578},{"path":838,"title":839,"description":840,"translated":578},{"path":842,"title":843,"description":844,"translated":578},{"path":17,"title":846,"description":847,"translated":578},{"path":849,"title":850,"description":851,"translated":578},{"path":853,"title":854,"description":855,"translated":578},{"path":857,"title":858,"description":859,"translated":578},{"path":861,"title":862,"description":863,"translated":578},{"path":581,"title":6,"description":574,"translated":578},{"path":866,"title":867,"description":868,"translated":578},{"path":870,"title":872,"description":873,"translated":578},{"path":877,"title":878,"description":879,"translated":578},{"path":881,"title":882,"description":883,"translated":578},{"path":885,"title":886,"description":887,"translated":578},{"path":889,"title":890,"description":891,"translated":578},{"path":893,"title":894,"description":895,"translated":578},{"path":897,"title":899,"description":900,"translated":578},{"path":904,"title":905,"description":906,"translated":578},{"path":908,"title":909,"description":910,"translated":578},{"path":912,"title":913,"description":914,"translated":578},{"path":916,"title":917,"description":918,"translated":578},{"path":920,"title":921,"description":922,"translated":578},{"path":924,"title":926,"description":927,"translated":578},{"path":931,"title":932,"description":933,"translated":578},{"path":935,"title":936,"description":937,"translated":578},{"path":939,"title":941,"description":942,"translated":578},{"path":946,"title":947,"description":948,"translated":578},{"path":950,"title":951,"description":952,"translated":578},{"path":954,"title":955,"description":956,"translated":578},{"path":958,"title":959,"description":960,"translated":578},{"path":962,"title":963,"description":964,"translated":578},1794502856484]