[{"data":1,"prerenderedAt":1067},["ShallowReactive",2],{"kb-en-\u002Fkb\u002Floads\u002Fsettlements":3,"kb-nav-en":593},{"page":4,"fallback":583},{"id":5,"title":6,"body":7,"date":580,"description":581,"extension":582,"faq":583,"meta":584,"navigation":585,"ogImage":586,"order":587,"path":588,"raw":583,"robots":586,"schemaOrg":586,"seo":589,"sitemap":590,"stem":591,"updated":586,"__hash__":592},"content_en\u002Fkb\u002Floads\u002Fsettlements.md","Support settlements",{"type":8,"value":9,"toc":570},"minimark",[10,14,19,38,59,144,148,170,177,200,203,207,210,219,222,513,517,520,524,544,551,555],[11,12,13],"p",{},"A settlement moves a support by a set amount. In Elementarium it is a load of its load\ncase: it acts in that case only, and a combination scales it by the case's factor, as it\nwould a force. It can be a translation or a rotation, at a node or along a line support.",[15,16,18],"h2",{"id":17},"placing","Placing one",[11,20,21,25,26,29,30,33,34,37],{},[22,23,24],"strong",{},"Loads › Special loads › Settlement"," places one at a node. The arrow beside it holds\n",[22,27,28],{},"Line settlement",", and both are also under the arrow on ",[22,31,32],{},"Point load"," in ",[22,35,36],{},"Home › Loads",".\nThe settlement lands in the active load case, like any other load.",[39,40,41,53],"ul",{},[42,43,44,47,48,52],"li",{},[22,45,46],{},"At a node."," Each direction is free until you switch it to ",[49,50,51],"em",{},"set"," and give a value. A\nsettlement prescribes only the directions it names.",[42,54,55,58],{},[22,56,57],{},"Along a line support."," Pick the line support. Each direction takes one value at the\nline's start and one at its end, and varies linearly by length between them. The buttons\nin the table's header swap the ends or make them equal.",[11,60,61,62,143],{},"Values are in the project's displacement and angle units, in the global axes, which are\nthe axes of the support. The directions offered follow the model type: a plane frame has\nno ",[63,64,67],"span",{"className":65},[66],"katex",[63,68,72],{"className":69,"ariaHidden":71},[70],"katex-html","true",[63,73,76,81],{"className":74},[75],"base",[63,77],{"className":78,"style":80},[79],"strut","height:0.9694em;vertical-align:-0.2861em;",[63,82,85,91],{"className":83},[84],"mord",[63,86,90],{"className":87,"style":89},[84,88],"mathnormal","margin-right:0.109em;","U",[63,92,95],{"className":93},[94],"msupsub",[63,96,100,134],{"className":97},[98,99],"vlist-t","vlist-t2",[63,101,104,129],{"className":102},[103],"vlist-r",[63,105,109],{"className":106,"style":108},[107],"vlist","height:0.1514em;",[63,110,112,117],{"style":111},"top:-2.55em;margin-left:-0.109em;margin-right:0.05em;",[63,113],{"className":114,"style":116},[115],"pstrut","height:2.7em;",[63,118,124],{"className":119},[120,121,122,123],"sizing","reset-size6","size3","mtight",[63,125,128],{"className":126,"style":127},[84,88,123],"margin-right:0.0359em;","y",[63,130,133],{"className":131},[132],"vlist-s","​",[63,135,137],{"className":136},[103],[63,138,141],{"className":139,"style":140},[107],"height:0.2861em;",[63,142],{},", and a truss has no rotations.",[15,145,147],{"id":146},"rigid-only","A direction needs a rigid support",[11,149,150,151,169],{},"A settlement moves a support, so it acts only on a direction that support holds rigidly.\nAnywhere else it would invent a support that is not in the model: 5 cm prescribed along a\nfree ",[63,152,154],{"className":153},[66],[63,155,157],{"className":156,"ariaHidden":71},[70],[63,158,160,164],{"className":159},[75],[63,161],{"className":162,"style":163},[79],"height:0.6833em;",[63,165,168],{"className":166,"style":167},[84,88],"margin-right:0.0785em;","X"," would pin the node there. A spring is not rigid, so a direction on a spring does\nnot count either.",[11,171,172,173,176],{},"A direction without a rigid support is ",[22,174,175],{},"ignored",":",[39,178,179,182,193],{},[42,180,181],{},"The load editor will not let you set it, and says why.",[42,183,184,185,188,189,192],{},"If the support changes afterwards, the model check reports ",[49,186,187],{},"Prescribed displacement\nwithout a support"," or ",[49,190,191],{},"Line settlement without a support",", and the viewer marks the\ndirection as ignored.",[42,194,195,196,199],{},"The settlement's properties name the direction, with ",[22,197,198],{},"Make … rigid"," to fix it.",[11,201,202],{},"For a line settlement, the directions are the ones that line support holds rigidly.",[15,204,206],{"id":205},"combinations","In a combination",[11,208,209],{},"A settlement is scaled with its case. A settlement of 10 mm in a case that a combination\ntakes at 1.35 moves the support 13.5 mm in that combination, and its internal forces scale\nby the same factor. A case that a combination leaves out leaves its settlement out too.",[11,211,212,213,218],{},"Give a settlement a load case of its own, so it can be factored and grouped apart from\neverything else. See ",[214,215,217],"a",{"href":216},"\u002Fkb\u002Floads\u002Fload-cases","Load cases",".",[11,220,221],{},"Second-order analysis and a buckling reference state solve a load state as a whole, and a\nsettlement in it is scaled the same way. A settlement stresses a structure only where it is\nstatically indeterminate: a simply supported beam follows its support and carries nothing.",[223,224,227],"callout",{"title":225,"type":226},"A hand check","check",[11,228,229,230,246,247,265,266,396,397,512],{},"Two equal spans ",[63,231,233],{"className":232},[66],[63,234,236],{"className":235,"ariaHidden":71},[70],[63,237,239,242],{"className":238},[75],[63,240],{"className":241,"style":163},[79],[63,243,245],{"className":244},[84,88],"L",", with the middle support settled by ",[63,248,250],{"className":249},[66],[63,251,253],{"className":252,"ariaHidden":71},[70],[63,254,256,260],{"className":255},[75],[63,257],{"className":258,"style":259},[79],"height:0.6944em;",[63,261,264],{"className":262,"style":263},[84,88],"margin-right:0.0379em;","δ",":\n",[63,267,269],{"className":268},[66],[63,270,272,337],{"className":271,"ariaHidden":71},[70],[63,273,275,279,324,329,334],{"className":274},[75],[63,276],{"className":277,"style":278},[79],"height:0.8333em;vertical-align:-0.15em;",[63,280,282,286],{"className":281},[84],[63,283,285],{"className":284,"style":89},[84,88],"M",[63,287,289],{"className":288},[94],[63,290,292,315],{"className":291},[98,99],[63,293,295,312],{"className":294},[103],[63,296,299],{"className":297,"style":298},[107],"height:0.3283em;",[63,300,301,304],{"style":111},[63,302],{"className":303,"style":116},[115],[63,305,307],{"className":306},[120,121,122,123],[63,308,311],{"className":309,"style":310},[84,88,123],"margin-right:0.0502em;","B",[63,313,133],{"className":314},[132],[63,316,318],{"className":317},[103],[63,319,322],{"className":320,"style":321},[107],"height:0.15em;",[63,323],{},[63,325],{"className":326,"style":328},[327],"mspace","margin-right:0.2778em;",[63,330,333],{"className":331},[332],"mrel","=",[63,335],{"className":336,"style":328},[327],[63,338,340,344,348,353,357,360,364],{"className":339},[75],[63,341],{"className":342,"style":343},[79],"height:1.0641em;vertical-align:-0.25em;",[63,345,347],{"className":346},[84],"3",[63,349,352],{"className":350,"style":351},[84,88],"margin-right:0.0576em;","E",[63,354,356],{"className":355,"style":167},[84,88],"I",[63,358,264],{"className":359,"style":263},[84,88],[63,361,363],{"className":362},[84],"\u002F",[63,365,367,370],{"className":366},[84],[63,368,245],{"className":369},[84,88],[63,371,373],{"className":372},[94],[63,374,376],{"className":375},[98],[63,377,379],{"className":378},[103],[63,380,383],{"className":381,"style":382},[107],"height:0.8141em;",[63,384,386,389],{"style":385},"top:-3.063em;margin-right:0.05em;",[63,387],{"className":388,"style":116},[115],[63,390,392],{"className":391},[120,121,122,123],[63,393,395],{"className":394},[84,123],"2"," over the support and ",[63,398,400],{"className":399},[66],[63,401,403,461],{"className":402,"ariaHidden":71},[70],[63,404,406,409,452,455,458],{"className":405},[75],[63,407],{"className":408,"style":278},[79],[63,410,412,417],{"className":411},[84],[63,413,416],{"className":414,"style":415},[84,88],"margin-right:0.0077em;","R",[63,418,420],{"className":419},[94],[63,421,423,444],{"className":422},[98,99],[63,424,426,441],{"className":425},[103],[63,427,429],{"className":428,"style":298},[107],[63,430,432,435],{"style":431},"top:-2.55em;margin-left:-0.0077em;margin-right:0.05em;",[63,433],{"className":434,"style":116},[115],[63,436,438],{"className":437},[120,121,122,123],[63,439,311],{"className":440,"style":310},[84,88,123],[63,442,133],{"className":443},[132],[63,445,447],{"className":446},[103],[63,448,450],{"className":449,"style":321},[107],[63,451],{},[63,453],{"className":454,"style":328},[327],[63,456,333],{"className":457},[332],[63,459],{"className":460,"style":328},[327],[63,462,464,467,471,474,477,480,483],{"className":463},[75],[63,465],{"className":466,"style":343},[79],[63,468,470],{"className":469},[84],"6",[63,472,352],{"className":473,"style":351},[84,88],[63,475,356],{"className":476,"style":167},[84,88],[63,478,264],{"className":479,"style":263},[84,88],[63,481,363],{"className":482},[84],[63,484,486,489],{"className":485},[84],[63,487,245],{"className":488},[84,88],[63,490,492],{"className":491},[94],[63,493,495],{"className":494},[98],[63,496,498],{"className":497},[103],[63,499,501],{"className":500,"style":382},[107],[63,502,503,506],{"style":385},[63,504],{"className":505,"style":116},[115],[63,507,509],{"className":508},[120,121,122,123],[63,510,347],{"className":511},[84,123]," at it. On a\nframe or a slab, check that the reactions sum to zero under the settlement case alone.",[15,514,516],{"id":515},"overlaps","Where two settlements meet",[11,518,519],{},"There is one value per case, node and direction. A nodal settlement on a node of a line,\nor two lines meeting at a corner, do not add up: the first one stated stands, nodal before\nline. Settlements in different load cases do add up in a combination, like any two cases.",[15,521,523],{"id":522},"export","In reports and files",[39,525,526,532,538],{},[42,527,528,531],{},[22,529,530],{},"The report"," lists settlements with the other loads of a case.",[42,533,534,537],{},[22,535,536],{},"IFC"," writes a nodal settlement as a displacement load on the node. A line settlement\nis not written, and the export warns that it was skipped.",[42,539,540,543],{},[22,541,542],{},"SAF"," writes a nodal settlement as a deformation of the support. It writes no line\nsupports yet, so a line settlement is not exported and the dialog says so.",[11,545,546,547,218],{},"See ",[214,548,550],{"href":549},"\u002Fkb\u002Freports\u002Fexchange","Import & export formats",[15,552,554],{"id":553},"related","Related",[11,556,557,559,560,564,565,569],{},[214,558,217],{"href":216}," covers how a case is built and grouped.\n",[214,561,563],{"href":562},"\u002Fkb\u002Fmodeling\u002Fsupports-and-releases","Supports and releases"," covers what a rigid direction\nis. ",[214,566,568],{"href":567},"\u002Fkb\u002Floads\u002Ftemperature-loads","Temperature loads"," is the other action that stresses a\nstructure only by restraint.",{"title":571,"searchDepth":572,"depth":572,"links":573},"",2,[574,575,576,577,578,579],{"id":17,"depth":572,"text":18},{"id":146,"depth":572,"text":147},{"id":205,"depth":572,"text":206},{"id":515,"depth":572,"text":516},{"id":522,"depth":572,"text":523},{"id":553,"depth":572,"text":554},"2026-11-05","Prescribed displacements and rotations at supported nodes and line supports, scaled by the combination factor, and why an unsupported direction is ignored.","md",false,{},true,null,1.2,"\u002Fkb\u002Floads\u002Fsettlements",{"title":6,"description":581},{"loc":588},"kb\u002Floads\u002Fsettlements","dNdFu3auEESkIyeWF95Or_Fp4dqRW4QpIIYTfZToKlk",{"sections":594,"extras":966,"flat":979},[595,630,688,711,747,778,821,870,897,924,939],{"path":596,"slug":597,"title":598,"description":599,"icon":600,"articles":601},"\u002Fkb\u002Fgetting-started","getting-started","Getting started","From an empty tab to a solved, checked structure — the three guides that get you productive in Elementarium.","lucide:rocket",[602,606,610,614,618,622,626],{"path":603,"title":604,"description":605,"translated":585},"\u002Fkb\u002Fgetting-started\u002Fkeyboard-shortcuts","Keyboard shortcuts","Every key binding in the workspace, the pointer gestures in the viewports, what the number fields accept, and what the command palette understands.",{"path":607,"title":608,"description":609,"translated":585},"\u002Fkb\u002Fgetting-started\u002Fquickstart","Quickstart","Build a portal frame, load it, solve it and read the bending moment diagram — about ten minutes from an empty tab.",{"path":611,"title":612,"description":613,"translated":585},"\u002Fkb\u002Fgetting-started\u002Fscope-and-limits","Scope and limits","What Elementarium models, solves and checks today, and what it does not — on one page, before you commit a job to it.",{"path":615,"title":616,"description":617,"translated":585},"\u002Fkb\u002Fgetting-started\u002Fsystem-requirements","System requirements","Which browsers and devices run Elementarium, how threading affects solve speed, and where the practical ceiling on model size comes from.",{"path":619,"title":620,"description":621,"translated":585},"\u002Fkb\u002Fgetting-started\u002Finterface-tour","Tour of the workspace","The ribbon, properties panel, dockable viewports, table dock, command palette, status bar and settings — what each part of the editor is for.",{"path":623,"title":624,"description":625,"translated":585},"\u002Fkb\u002Fgetting-started\u002Funits","Units","How units work in Elementarium — SI inside, your unit system on screen — and the handful of conversions that cause most wrong answers in structural models.",{"path":627,"title":628,"description":629,"translated":585},"\u002Fkb\u002Fgetting-started\u002Ffirst-analysis","Your first analysis","Load cases, combinations and a linear static solve — then how to decide whether the answer is trustworthy.",{"path":631,"slug":632,"title":633,"description":634,"icon":635,"articles":636},"\u002Fkb\u002Fmodeling","modeling","Modeling","Bars, beams, 3D frames, slabs and walls. Geometry, sections, supports and releases that behave like the real structure.","lucide:frame",[637,641,645,649,653,657,661,665,669,673,677,681,684],{"path":638,"title":639,"description":640,"translated":585},"\u002Fkb\u002Fmodeling\u002Fbars-beams-and-trusses","Bars, beams and trusses","When a member should be a bar and when a beam, how to model trusses and bracing, and what to do about members that only work in tension.",{"path":642,"title":643,"description":644,"translated":585},"\u002Fkb\u002Fmodeling\u002Fcolumn-heads","Column heads","A column or point support acting on a slab over its real footprint, elastic, rigid or stiff, so the moment at the column face converges.",{"path":646,"title":647,"description":648,"translated":585},"\u002Fkb\u002Fmodeling\u002Fdrawings-and-snapping","Drawings & snapping","Importing a DXF as a reference underlay, choosing its units and plane, and snapping model geometry onto it accurately.",{"path":650,"title":651,"description":652,"translated":585},"\u002Fkb\u002Fmodeling\u002Felastic-foundations","Elastic foundations","Grade beams, strip footings and walls on ground as line supports on springs — choosing a subgrade modulus, and where the model stops being true.",{"path":654,"title":655,"description":656,"translated":585},"\u002Fkb\u002Fmodeling\u002Fhinges","Hinges","A hinge anywhere along a member, releases at a node, line hinges on plate edges and beams, connected crossings, scissor hinges, hinge results and export.",{"path":658,"title":659,"description":660,"translated":585},"\u002Fkb\u002Fmodeling\u002Fplane-frames-in-3d","Plane frames in a 3D solver","When to use the 2D Frame and 2D Truss model types, why a flat structure in a 3D model is a mechanism, and how to restrain it.",{"path":662,"title":663,"description":664,"translated":585},"\u002Fkb\u002Fmodeling\u002Fribbed-slabs","Ribbed slabs","Ribs that work with their slab as T-beams — the eccentric web, T-section forces, effective widths to EN 1992, EN 1994, ACI 318 and AISC 360.",{"path":666,"title":667,"description":668,"translated":585},"\u002Fkb\u002Fmodeling\u002Fsections-and-materials","Sections & materials","What a section and a material contribute to the stiffness matrix and the design checks, and the values worth checking twice.",{"path":670,"title":671,"description":672,"translated":585},"\u002Fkb\u002Fmodeling\u002Fsurfaces","Slabs, walls and shells","Modelling surfaces in Elementarium — outlines, openings and thickness, how a beam or a wall attaches to a slab, local axes, and what a surface result means.",{"path":674,"title":675,"description":676,"translated":585},"\u002Fkb\u002Fmodeling\u002Fcopy-paste-and-snap","Snap, copy and paste","Object snap to nodes, midpoints, crossings and plate centres; copying geometry by a base node so the paste joins the model; pasting loads onto targets.",{"path":678,"title":679,"description":680,"translated":585},"\u002Fkb\u002Fmodeling\u002Fstructure-generators","Structure generators","Thirty-six parametric structures — trusses, frames, arches, towers, domes and shells — generated from a few dimensions, with supports and loads.",{"path":562,"title":682,"description":683,"translated":585},"Supports & releases","Pins, fixities, springs and end releases — what each one does to the stiffness matrix, and when each is right.",{"path":685,"title":686,"description":687,"translated":585},"\u002Fkb\u002Fmodeling\u002Ffirst-model","Your first model","The modeling loop end to end — geometry, sections, supports and releases — on a structure small enough to check by hand.",{"path":689,"slug":690,"title":691,"description":692,"icon":693,"articles":694},"\u002Fkb\u002Fmeshing","meshing","Meshing","Mesh density, local refinement and the quality checks that tell you when a mesh is fine enough to trust.","lucide:grid-3x3",[695,699,703,707],{"path":696,"title":697,"description":698,"translated":585},"\u002Fkb\u002Fmeshing\u002Felement-size","Choosing element size","Starting mesh densities for slabs, walls and rafts, and the convergence test that decides whether a mesh is fine enough.",{"path":700,"title":701,"description":702,"translated":585},"\u002Fkb\u002Fmeshing\u002Frefinement","Local refinement","Where to spend elements, where not to bother, and how to refine without wrecking element shape.",{"path":704,"title":705,"description":706,"translated":585},"\u002Fkb\u002Fmeshing\u002Fquality-checks","Mesh quality","Aspect ratio, skew and warping — what degrades a result, what the mesher reports, and how to tell whether the elements you are worried about matter.",{"path":708,"title":709,"description":710,"translated":585},"\u002Fkb\u002Fmeshing\u002Fmesh-refinements","Mesh refinements","Refinement zones tied to the model, round a node or column, along a member or edge, or through a polygon, holding a target element size inside.",{"path":712,"slug":713,"title":714,"description":715,"icon":716,"articles":717},"\u002Fkb\u002Floads","loads","Loads & combinations","Build load cases, generate code combinations automatically and find out which one actually governs.","lucide:arrow-down-to-line",[718,722,726,730,732,736,740,741,743],{"path":719,"title":720,"description":721,"translated":585},"\u002Fkb\u002Floads\u002Fasce-7-combinations","ASCE 7 combinations","LRFD and ASD combinations to ASCE 7-22 — how the generator maps your load groups onto D, L, Lr, S, W and E, and pairing them with the AISC check.",{"path":723,"title":724,"description":725,"translated":585},"\u002Fkb\u002Floads\u002Fcombinations","Automatic combinations","Generating EN 1990 and ASCE 7 combinations, understanding the equations behind them, and reading the generated set critically.",{"path":727,"title":728,"description":729,"translated":585},"\u002Fkb\u002Floads\u002Fenvelopes","Envelopes","Extracting the governing value across dozens of combinations without reading every one — and the traps in doing so.",{"path":216,"title":217,"description":731,"translated":585},"Actions, self-weight, imposed loads and load arrangements — how to build cases that stay separable.",{"path":733,"title":734,"description":735,"translated":585},"\u002Fkb\u002Floads\u002Fload-panels","Load panels","Areas that hand a floor, roof or wall pressure to the members around them as line loads, one way or two way, without meshing a slab.",{"path":737,"title":738,"description":739,"translated":585},"\u002Fkb\u002Floads\u002Fpoint-load-contact-area","Spreading a point load","A point load on a plate acting over a rectangle or circle, dispersed at 45° to the mid-plane (EN 1991-2 §4.3.6), so the moment under it converges.",{"path":588,"title":6,"description":581,"translated":585},{"path":567,"title":568,"description":742,"translated":585},"Uniform temperature change and through-depth gradients — what each does to a free and a restrained structure, and the coefficients to use.",{"path":744,"title":745,"description":746,"translated":585},"\u002Fkb\u002Floads\u002Fwind-and-snow","Wind and snow","Wind to EN 1991-1-4 and snow to EN 1991-1-3, generated on a building envelope — site inputs, recognised roof shapes, the cases produced, and the limits.",{"path":748,"slug":749,"title":750,"description":751,"icon":752,"articles":753},"\u002Fkb\u002Fanalysis","analysis","Analysis types","Linear static, modal, linear buckling and second-order — what each analysis assumes, what it returns and how to read the result.","lucide:activity",[754,758,762,766,770,774],{"path":755,"title":756,"description":757,"translated":585},"\u002Fkb\u002Fanalysis\u002Fsolvers","Choosing a linear solver","Conjugate gradients with Jacobi, incomplete Cholesky or multigrid, or a direct factorisation — what each does, how to watch it, and when the choice matters.",{"path":759,"title":760,"description":761,"translated":585},"\u002Fkb\u002Fanalysis\u002Fbuckling","Linear buckling","Critical load factors and buckling shapes — what α_cr means, why it is an upper bound, and how to use it for second-order effects.",{"path":763,"title":764,"description":765,"translated":585},"\u002Fkb\u002Fanalysis\u002Flinear-static","Linear static analysis","The workhorse analysis — what K u = f actually assumes, what it returns, and where linearity stops being a reasonable model.",{"path":767,"title":768,"description":769,"translated":585},"\u002Fkb\u002Fanalysis\u002Fmodal","Modal analysis","Natural frequencies and mode shapes — mass modelling, participation factors and what the numbers are good for.",{"path":771,"title":772,"description":773,"translated":585},"\u002Fkb\u002Fanalysis\u002Fsecond-order","Second-order analysis","P-Δ and P-δ solved by iteration, geometric imperfections to EN 1993-1-1 §5.3, and why a second-order result cannot be superposed.",{"path":775,"title":776,"description":777,"translated":585},"\u002Fkb\u002Fanalysis\u002Fverification","Verifying the solver","Closed-form cases you can build in ten minutes to test the solver — beams, frames, columns, plates, frequencies — with the expected error of each.",{"path":779,"slug":780,"title":781,"description":782,"icon":783,"articles":784},"\u002Fkb\u002Fdesign-checks","design-checks","Design checks","Utilisation ratios, governing cases and the clause behind every number a check reports.","lucide:clipboard-check",[785,789,793,797,801,805,809,813,817],{"path":786,"title":787,"description":788,"translated":585},"\u002Fkb\u002Fdesign-checks\u002Fcold-formed","Cold-formed C and Z members — EN 1993-1-3","Cold-formed C and Z members and purlins to EN 1993-1-3 — the effective section, cross-section and member resistance, purlins held by sheeting, and what is left to you.",{"path":790,"title":791,"description":792,"translated":585},"\u002Fkb\u002Fdesign-checks\u002Fforces-by-hand","Forces entered by hand","Check a member with no analysis or no model, or type over what the analysis gave, and what the row, sheet and report say about it.",{"path":794,"title":795,"description":796,"translated":585},"\u002Fkb\u002Fdesign-checks\u002Fnational-annexes","National annexes","Where nationally determined parameters change the answer, how to select the right annex, and what to state in the report.",{"path":798,"title":799,"description":800,"translated":585},"\u002Fkb\u002Fdesign-checks\u002Fsection-classification","Section classification","How EN 1993-1-1 Table 5.2 classifies a steel section, why the class depends on the combination, and what the check does with a section it cannot classify.",{"path":802,"title":803,"description":804,"translated":585},"\u002Fkb\u002Fdesign-checks\u002Fserviceability","Serviceability checks","Deflection, drift and floor frequency checked member by member at SLS, to the national annexes, EN 1993-1-4, IBC, AISC or EN 1995-1-1.",{"path":806,"title":807,"description":808,"translated":585},"\u002Fkb\u002Fdesign-checks\u002Fstainless","Stainless steel — EN 1993-1-4","Stainless member resistance and deflection to EN 1993-1-4 — how a material is read as stainless, what is checked, and what is left to you.",{"path":810,"title":811,"description":812,"translated":585},"\u002Fkb\u002Fdesign-checks\u002Faisc","Steel — AISC 360","Member strength to Chapters D to H, LRFD or ASD — compression buckling, lateral-torsional buckling and every C_b option written down.",{"path":814,"title":815,"description":816,"translated":585},"\u002Fkb\u002Fdesign-checks\u002Fsteel","Steel — EN 1993-1-1","Member resistance to §6.2 and §6.3 — what is checked at every station, where buckling lengths and M_cr come from, and the clauses left to you — with haunched members, cold-formed C and Z members and fire resistance.",{"path":818,"title":819,"description":820,"translated":585},"\u002Fkb\u002Fdesign-checks\u002Ffire","Steel in fire — EN 1993-1-2","Fire resistance of carbon steel members to EN 1993-1-2 — the steel temperature at the required time, the resistances at that temperature, the critical temperature, and what is left to you.",{"path":822,"slug":823,"title":824,"description":825,"icon":826,"articles":827},"\u002Fkb\u002Freports","reports","Results & reports","Diagrams, contours and tables in the viewport, and the calculation package you hand to a reviewer.","lucide:file-chart-column",[828,832,836,838,842,846,850,854,858,862,866],{"path":829,"title":830,"description":831,"translated":585},"\u002Fkb\u002Freports\u002Fexporting","Exporting a report","Assembling a calculation package a reviewer can follow — inputs, model, results and checks, in the order a calc package should be.",{"path":833,"title":834,"description":835,"translated":585},"\u002Fkb\u002Freports\u002Fifc","IFC structural models","The IFC structural analysis view in and out — what IFC2X3, IFC4 and IFC4X3 files bring, what an export carries, and what IFC cannot say.",{"path":549,"title":550,"description":837,"translated":585},"IFC structural models and SAF workbooks in and out, DXF as a reference drawing, result tables as CSV or xlsx, and an OOFEM input deck.",{"path":839,"title":840,"description":841,"translated":585},"\u002Fkb\u002Freports\u002Freading-diagrams","Reading diagrams","Bending, shear and axial diagrams, contour plots and deformed shapes — the conventions behind what you are looking at.",{"path":843,"title":844,"description":845,"translated":585},"\u002Fkb\u002Freports\u002Fsingular-points","Reading singular points","Why the peak at a column, a point load or a re-entrant corner grows with the mesh, how plate results mark those points, and what to do at each.",{"path":847,"title":848,"description":849,"translated":585},"\u002Fkb\u002Freports\u002Freport-formats","Report formats","The report typeset as a PDF with a live preview, as PDF\u002FA-2b for archiving, or as an editable Word file, in English or Czech.",{"path":851,"title":852,"description":853,"translated":585},"\u002Fkb\u002Freports\u002Fresult-tables","Result tables","Filtering, sorting and extracting numbers — getting the value you need out of a solved model without scrolling.",{"path":855,"title":856,"description":857,"translated":585},"\u002Fkb\u002Freports\u002Freviewing","Reviewing a calculation","For the checking engineer — how to interrogate a model you did not build, what the report guarantees, and the questions to ask first.",{"path":859,"title":860,"description":861,"translated":585},"\u002Fkb\u002Freports\u002Fsection-cuts","Section cuts","A line drawn across a slab, the plate result charted along it, and the moment, shear or normal force the line carries, integrated over its length.",{"path":863,"title":864,"description":865,"translated":585},"\u002Fkb\u002Freports\u002Fsmoothing-regions","Smoothing regions","Average, ring fit or face value over a region at a column, point load or corner, applied per load case, for plate design values that converge.",{"path":867,"title":868,"description":869,"translated":585},"\u002Fkb\u002Freports\u002Fviewers","Viewers, colour scales and maps","The viewer strip and switches, the result board, tabs or tiles, linked viewers, legend limits, colour maps and plate results drawn as a 3D surface.",{"path":871,"slug":872,"title":873,"description":874,"icon":875,"articles":876},"\u002Fkb\u002Fcollaboration","collaboration","Collaboration & sync","Shared models, real-time editing, and offline edits that merge cleanly when you reconnect.","lucide:users-round",[877,881,885,889,893],{"path":878,"title":879,"description":880,"translated":585},"\u002Fkb\u002Fcollaboration\u002Fcomments","Comments","Threads pinned to nodes, members, plates or points, @mentions, blocking comments that hold up a report, and the notifications they send.",{"path":882,"title":883,"description":884,"translated":585},"\u002Fkb\u002Fcollaboration\u002Fsharing-projects","Sharing a project","Inviting people to a model, what each role can do, and how to coordinate two engineers in the same structure.",{"path":886,"title":887,"description":888,"translated":585},"\u002Fkb\u002Fcollaboration\u002Fversion-history","Version history","Automatic checkpoints and named versions — how long they are kept, previewing an earlier state, and restoring it in place or as a new project.",{"path":890,"title":891,"description":892,"translated":585},"\u002Fkb\u002Fcollaboration\u002Fdevices","Working across devices","One account on every device — how a project follows you from desk to laptop, tablet or phone, and what changes on a small screen.",{"path":894,"title":895,"description":896,"translated":585},"\u002Fkb\u002Fcollaboration\u002Fworking-offline","Working offline","What keeps working with no connection, what needs one, how a session and a project survive without a signal, and how offline edits merge when you come back.",{"path":898,"slug":899,"title":900,"description":901,"icon":902,"articles":903},"\u002Fkb\u002Ftheory","theory","Theory notes","The mechanics inside the solver — element formulations, sign conventions, numerical assumptions and their limits.","lucide:sigma",[904,908,912,916,920],{"path":905,"title":906,"description":907,"translated":585},"\u002Fkb\u002Ftheory\u002Felement-formulations","Element formulations","Degrees of freedom, interpolation and limits for every element type in the solver — what each one can represent and what it cannot.",{"path":909,"title":910,"description":911,"translated":585},"\u002Fkb\u002Ftheory\u002Fglossary","Glossary","Finite element and structural terms as Elementarium uses them, from degrees of freedom to MITC4 and utilisation, each linked to its page.",{"path":913,"title":914,"description":915,"translated":585},"\u002Fkb\u002Ftheory\u002Fsign-conventions","Sign conventions","Axes, positive directions and how to read a diagram without guessing — the page that prevents most result confusion.",{"path":917,"title":918,"description":919,"translated":585},"\u002Fkb\u002Ftheory\u002Fdirect-stiffness-method","The direct stiffness method","How a finite element solver turns a model into K u = f and back — stiffness, transformation, assembly, constraints, solution and recovery.",{"path":921,"title":922,"description":923,"translated":585},"\u002Fkb\u002Ftheory\u002Fwinkler-foundations","Winkler foundations","The bedding model behind elastic foundations — what it assumes, how to choose a modulus, and precisely where the idealisation stops being true.",{"path":925,"slug":926,"title":927,"description":928,"icon":929,"articles":930},"\u002Fkb\u002Ftroubleshooting","troubleshooting","Troubleshooting","Solver errors, unstable models and results that look wrong — with the usual causes listed first.","lucide:life-buoy",[931,935],{"path":932,"title":933,"description":934,"translated":585},"\u002Fkb\u002Ftroubleshooting\u002Fsolver-errors","Solver errors","What each class of solver message means, what usually causes it, and what to do next.",{"path":936,"title":937,"description":938,"translated":585},"\u002Fkb\u002Ftroubleshooting\u002Fsingular-stiffness-matrix","Why the solver reports a singular stiffness matrix","The most common solver failure — what singularity means mechanically, the six causes in order of frequency, and how to find yours in minutes.",{"path":940,"slug":941,"title":942,"description":943,"icon":944,"articles":945},"\u002Fkb\u002Faccount","account","Account & billing","Plans, limits, invoices, and what happens to your projects when a subscription ends.","lucide:credit-card",[946,950,954,958,962],{"path":947,"title":948,"description":949,"translated":585},"\u002Fkb\u002Faccount\u002Finvoices","Invoices & VAT","Billing details, receipts, VAT handling and how to get an invoice your accounts department will accept.",{"path":951,"title":952,"description":953,"translated":585},"\u002Fkb\u002Faccount\u002Fcancelling","Pausing or cancelling","How to stop paying without losing your work — what happens to projects, reports and history when a subscription ends.",{"path":955,"title":956,"description":957,"translated":585},"\u002Fkb\u002Faccount\u002Fplans","Plans & limits","What the free plan includes, what Pro adds, and how the caps are actually measured.",{"path":959,"title":960,"description":961,"translated":585},"\u002Fkb\u002Faccount\u002Fstudent","Student accounts","A larger free tier for students and researchers — verify an academic email address, what it unlocks, and why it is re-confirmed every year.",{"path":963,"title":964,"description":965,"translated":585},"\u002Fkb\u002Faccount\u002Ftwo-factor","Two-factor authentication","Signing in with an authenticator code as well as your password, recovery codes, turning it off, and Google sign-in on an account that has a password.",[967,971,975],{"path":968,"title":969,"description":970,"translated":585},"\u002Fkb\u002Ffaq","Frequently asked questions","The questions engineers ask before they trust a new structural analysis package — answered directly.",{"path":972,"title":973,"description":974,"translated":585},"\u002Fkb\u002Frelease-notes","Release notes","Every Elementarium release, newest first: what shipped in the tab, and what it changes in your models.",{"path":976,"title":977,"description":978,"translated":585},"\u002Fkb\u002Fall","All articles","Every article in the Elementarium knowledge base, grouped by section.",[980,981,982,983,984,985,986,987,988,989,990,991,992,993,994,995,996,997,998,999,1000,1001,1002,1003,1004,1005,1006,1007,1008,1009,1010,1011,1012,1013,1014,1015,1016,1017,1018,1019,1020,1021,1022,1023,1024,1025,1026,1027,1028,1029,1030,1031,1032,1033,1034,1035,1036,1037,1038,1039,1040,1041,1042,1043,1044,1045,1046,1047,1048,1049,1050,1051,1052,1053,1054,1055,1056,1057,1058,1059,1060,1061,1062,1063,1064,1065,1066],{"path":596,"title":598,"description":599,"translated":585},{"path":603,"title":604,"description":605,"translated":585},{"path":607,"title":608,"description":609,"translated":585},{"path":611,"title":612,"description":613,"translated":585},{"path":615,"title":616,"description":617,"translated":585},{"path":619,"title":620,"description":621,"translated":585},{"path":623,"title":624,"description":625,"translated":585},{"path":627,"title":628,"description":629,"translated":585},{"path":631,"title":633,"description":634,"translated":585},{"path":638,"title":639,"description":640,"translated":585},{"path":642,"title":643,"description":644,"translated":585},{"path":646,"title":647,"description":648,"translated":585},{"path":650,"title":651,"description":652,"translated":585},{"path":654,"title":655,"description":656,"translated":585},{"path":658,"title":659,"description":660,"translated":585},{"path":662,"title":663,"description":664,"translated":585},{"path":666,"title":667,"description":668,"translated":585},{"path":670,"title":671,"description":672,"translated":585},{"path":674,"title":675,"description":676,"translated":585},{"path":678,"title":679,"description":680,"translated":585},{"path":562,"title":682,"description":683,"translated":585},{"path":685,"title":686,"description":687,"translated":585},{"path":689,"title":691,"description":692,"translated":585},{"path":696,"title":697,"description":698,"translated":585},{"path":700,"title":701,"description":702,"translated":585},{"path":704,"title":705,"description":706,"translated":585},{"path":708,"title":709,"description":710,"translated":585},{"path":712,"title":714,"description":715,"translated":585},{"path":719,"title":720,"description":721,"translated":585},{"path":723,"title":724,"description":725,"translated":585},{"path":727,"title":728,"description":729,"translated":585},{"path":216,"title":217,"description":731,"translated":585},{"path":733,"title":734,"description":735,"translated":585},{"path":737,"title":738,"description":739,"translated":585},{"path":588,"title":6,"description":581,"translated":585},{"path":567,"title":568,"description":742,"translated":585},{"path":744,"title":745,"description":746,"translated":585},{"path":748,"title":750,"description":751,"translated":585},{"path":755,"title":756,"description":757,"translated":585},{"path":759,"title":760,"description":761,"translated":585},{"path":763,"title":764,"description":765,"translated":585},{"path":767,"title":768,"description":769,"translated":585},{"path":771,"title":772,"description":773,"translated":585},{"path":775,"title":776,"description":777,"translated":585},{"path":779,"title":781,"description":782,"translated":585},{"path":786,"title":787,"description":788,"translated":585},{"path":790,"title":791,"description":792,"translated":585},{"path":794,"title":795,"description":796,"translated":585},{"path":798,"title":799,"description":800,"translated":585},{"path":802,"title":803,"description":804,"translated":585},{"path":806,"title":807,"description":808,"translated":585},{"path":810,"title":811,"description":812,"translated":585},{"path":814,"title":815,"description":816,"translated":585},{"path":818,"title":819,"description":820,"translated":585},{"path":822,"title":824,"description":825,"translated":585},{"path":829,"title":830,"description":831,"translated":585},{"path":833,"title":834,"description":835,"translated":585},{"path":549,"title":550,"description":837,"translated":585},{"path":839,"title":840,"description":841,"translated":585},{"path":843,"title":844,"description":845,"translated":585},{"path":847,"title":848,"description":849,"translated":585},{"path":851,"title":852,"description":853,"translated":585},{"path":855,"title":856,"description":857,"translated":585},{"path":859,"title":860,"description":861,"translated":585},{"path":863,"title":864,"description":865,"translated":585},{"path":867,"title":868,"description":869,"translated":585},{"path":871,"title":873,"description":874,"translated":585},{"path":878,"title":879,"description":880,"translated":585},{"path":882,"title":883,"description":884,"translated":585},{"path":886,"title":887,"description":888,"translated":585},{"path":890,"title":891,"description":892,"translated":585},{"path":894,"title":895,"description":896,"translated":585},{"path":898,"title":900,"description":901,"translated":585},{"path":905,"title":906,"description":907,"translated":585},{"path":909,"title":910,"description":911,"translated":585},{"path":913,"title":914,"description":915,"translated":585},{"path":917,"title":918,"description":919,"translated":585},{"path":921,"title":922,"description":923,"translated":585},{"path":925,"title":927,"description":928,"translated":585},{"path":932,"title":933,"description":934,"translated":585},{"path":936,"title":937,"description":938,"translated":585},{"path":940,"title":942,"description":943,"translated":585},{"path":947,"title":948,"description":949,"translated":585},{"path":951,"title":952,"description":953,"translated":585},{"path":955,"title":956,"description":957,"translated":585},{"path":959,"title":960,"description":961,"translated":585},{"path":963,"title":964,"description":965,"translated":585},1794502857720]