[{"data":1,"prerenderedAt":1141},["ShallowReactive",2],{"kb-en-\u002Fkb\u002Floads\u002Fpoint-load-contact-area":3,"kb-nav-en":662},{"page":4,"fallback":652},{"id":5,"title":6,"body":7,"date":649,"description":650,"extension":651,"faq":652,"meta":653,"navigation":654,"ogImage":655,"order":656,"path":657,"raw":652,"robots":655,"schemaOrg":655,"seo":658,"sitemap":659,"stem":660,"updated":655,"__hash__":661},"content_en\u002Fkb\u002Floads\u002Fpoint-load-contact-area.md","Spreading a point load",{"type":8,"value":9,"toc":640},"minimark",[10,20,25,28,243,352,355,466,470,474,477,481,504,512,516,523,621,627,631],[11,12,13,14,19],"p",{},"A point load on a plate is a finite force on zero area. The moment under it grows every\ntime the mesh is refined: it is a ",[15,16,18],"a",{"href":17},"\u002Fkb\u002Freports\u002Fsingular-points","singular point",". Real\nloads arrive over an area, such as a wheel's contact patch, a post's base plate or a\nmachine foot. Giving the load that area makes the result under it converge.",[21,22,24],"h2",{"id":23},"what-it-does","What it does",[11,26,27],{},"The load acts over a rectangle a × b or a circle of diameter d at the surface. That area\nis dispersed at an angle φ, through any surfacing and then through half the slab, down to\nthe slab's mid-plane, where the plate carries it:",[29,30,33],"span",{"className":31},[32],"katex-display",[29,34,37],{"className":35},[36],"katex",[29,38,42,110,132,209],{"className":39,"ariaHidden":41},[40],"katex-html","true",[29,43,46,51,97,102,107],{"className":44},[45],"base",[29,47],{"className":48,"style":50},[49],"strut","height:0.8019em;",[29,52,55,59],{"className":53},[54],"mord",[29,56,15],{"className":57},[54,58],"mathnormal",[29,60,63],{"className":61},[62],"msupsub",[29,64,67],{"className":65},[66],"vlist-t",[29,68,71],{"className":69},[70],"vlist-r",[29,72,75],{"className":73,"style":50},[74],"vlist",[29,76,78,83],{"style":77},"top:-3.113em;margin-right:0.05em;",[29,79],{"className":80,"style":82},[81],"pstrut","height:2.7em;",[29,84,90],{"className":85},[86,87,88,89],"sizing","reset-size6","size3","mtight",[29,91,93],{"className":92},[54,89],[29,94,96],{"className":95},[54,89],"′",[29,98],{"className":99,"style":101},[100],"mspace","margin-right:0.2778em;",[29,103,106],{"className":104},[105],"mrel","=",[29,108],{"className":109,"style":101},[100],[29,111,113,117,120,124,129],{"className":112},[45],[29,114],{"className":115,"style":116},[49],"height:0.6667em;vertical-align:-0.0833em;",[29,118,15],{"className":119},[54,58],[29,121],{"className":122,"style":123},[100],"margin-right:0.2222em;",[29,125,128],{"className":126},[127],"mbin","+",[29,130],{"className":131,"style":123},[100],[29,133,135,139,143,147,152,200,203,206],{"className":134},[45],[29,136],{"className":137,"style":138},[49],"height:1em;vertical-align:-0.25em;",[29,140,142],{"className":141},[54],"2",[29,144],{"className":145,"style":146},[100],"margin-right:0.1667em;",[29,148,151],{"className":149},[150],"mopen","(",[29,153,155,159],{"className":154},[54],[29,156,158],{"className":157},[54,58],"h",[29,160,162],{"className":161},[62],[29,163,166,191],{"className":164},[66,165],"vlist-t2",[29,167,169,186],{"className":168},[70],[29,170,173],{"className":171,"style":172},[74],"height:0.1514em;",[29,174,176,179],{"style":175},"top:-2.55em;margin-left:0em;margin-right:0.05em;",[29,177],{"className":178,"style":82},[81],[29,180,182],{"className":181},[86,87,88,89],[29,183,185],{"className":184},[54,58,89],"s",[29,187,190],{"className":188},[189],"vlist-s","​",[29,192,194],{"className":193},[70],[29,195,198],{"className":196,"style":197},[74],"height:0.15em;",[29,199],{},[29,201],{"className":202,"style":123},[100],[29,204,128],{"className":205},[127],[29,207],{"className":208,"style":123},[100],[29,210,212,215,219,223,228,231,236,239],{"className":211},[45],[29,213],{"className":214,"style":138},[49],[29,216,218],{"className":217},[54,58],"t",[29,220,222],{"className":221},[54],"\u002F2",[29,224,227],{"className":225},[226],"mclose",")",[29,229],{"className":230,"style":146},[100],[29,232,235],{"className":233},[234],"mop","tan",[29,237],{"className":238,"style":146},[100],[29,240,242],{"className":241},[54,58],"φ",[11,244,245,246,299,300,316,317,334,335,351],{},"with ",[29,247,249],{"className":248},[36],[29,250,252],{"className":251,"ariaHidden":41},[40],[29,253,255,259],{"className":254},[45],[29,256],{"className":257,"style":258},[49],"height:0.8444em;vertical-align:-0.15em;",[29,260,262,265],{"className":261},[54],[29,263,158],{"className":264},[54,58],[29,266,268],{"className":267},[62],[29,269,271,291],{"className":270},[66,165],[29,272,274,288],{"className":273},[70],[29,275,277],{"className":276,"style":172},[74],[29,278,279,282],{"style":175},[29,280],{"className":281,"style":82},[81],[29,283,285],{"className":284},[86,87,88,89],[29,286,185],{"className":287},[54,58,89],[29,289,190],{"className":290},[189],[29,292,294],{"className":293},[70],[29,295,297],{"className":296,"style":197},[74],[29,298],{}," the surfacing thickness and ",[29,301,303],{"className":302},[36],[29,304,306],{"className":305,"ariaHidden":41},[40],[29,307,309,313],{"className":308},[45],[29,310],{"className":311,"style":312},[49],"height:0.6151em;",[29,314,218],{"className":315},[54,58]," the slab thickness. The same widening applies\nto ",[29,318,320],{"className":319},[36],[29,321,323],{"className":322,"ariaHidden":41},[40],[29,324,326,330],{"className":325},[45],[29,327],{"className":328,"style":329},[49],"height:0.6944em;",[29,331,333],{"className":332},[54,58],"b"," and to ",[29,336,338],{"className":337},[36],[29,339,341],{"className":340,"ariaHidden":41},[40],[29,342,344,347],{"className":343},[45],[29,345],{"className":346,"style":329},[49],[29,348,350],{"className":349},[54,58],"d",". The default angle is 45°, as EN 1991-2 §4.3.6 gives for wheel loads.",[11,353,354],{},"The forces then act as a pressure over the dispersed area, and the total force stays\nexact. A moment applied at the node stays at the node.",[11,356,357,358,465],{},"For example, a 0.4 × 0.4 m contact patch on 80 mm of surfacing over a 250 mm slab\nspreads to ",[29,359,361],{"className":360},[36],[29,362,364,384,412,435,455],{"className":363,"ariaHidden":41},[40],[29,365,367,371,375,378,381],{"className":366},[45],[29,368],{"className":369,"style":370},[49],"height:0.7278em;vertical-align:-0.0833em;",[29,372,374],{"className":373},[54],"0.4",[29,376],{"className":377,"style":123},[100],[29,379,128],{"className":380},[127],[29,382],{"className":383,"style":123},[100],[29,385,387,390,393,396,399,403,406,409],{"className":386},[45],[29,388],{"className":389,"style":138},[49],[29,391,142],{"className":392},[54],[29,394],{"className":395,"style":146},[100],[29,397,151],{"className":398},[150],[29,400,402],{"className":401},[54],"0.08",[29,404],{"className":405,"style":123},[100],[29,407,128],{"className":408},[127],[29,410],{"className":411,"style":123},[100],[29,413,415,418,422,425,428,432],{"className":414},[45],[29,416],{"className":417,"style":138},[49],[29,419,421],{"className":420},[54],"0.125",[29,423,227],{"className":424},[226],[29,426],{"className":427,"style":123},[100],[29,429,431],{"className":430},[127],"⋅",[29,433],{"className":434,"style":123},[100],[29,436,438,442,446,449,452],{"className":437},[45],[29,439],{"className":440,"style":441},[49],"height:0.6444em;",[29,443,445],{"className":444},[54],"1",[29,447],{"className":448,"style":101},[100],[29,450,106],{"className":451},[105],[29,453],{"className":454,"style":101},[100],[29,456,458,461],{"className":457},[45],[29,459],{"className":460,"style":441},[49],[29,462,464],{"className":463},[54],"0.81"," m square at the mid-plane.",[21,467,469],{"id":468},"measured","Measured",[471,472],"diagram-peak-convergence",{"kind":473},"load",[11,475,476],{},"As a point load, the moment under it rose by 14 % on the last halving of the element\nsize and would keep rising. Spread over its area, it changed by 0.6 %.",[21,478,480],{"id":479},"when","When to use it",[482,483,484,492,498],"ul",{},[485,486,487,491],"li",{},[488,489,490],"strong",{},"Wheel and axle loads"," on a deck or a parking slab, where the code gives the contact\narea and the dispersion.",[485,493,494,497],{},[488,495,496],{},"Posts, props and machine feet"," standing on a slab.",[485,499,500,503],{},[488,501,502],{},"Any point load whose local moment you intend to read."," If you only need global\nresults, such as reactions, deflection away from the load or moments elsewhere, a point\nload is fine as it is.",[11,505,506,507,511],{},"A column standing on a slab can carry its load the same way, but if the column is in the\nmodel, a ",[15,508,510],{"href":509},"\u002Fkb\u002Fmodeling\u002Fcolumn-heads","column head"," is the better tool: it also makes the\ncolumn's end moment independent of the mesh.",[21,513,515],{"id":514},"setting-it-up","Setting it up",[11,517,518,519,522],{},"Select a nodal load on a plate and open ",[488,520,521],{},"Spread on a plate"," in its properties. The\nsection is there for nodal loads only, and stays collapsed until a spread is set.",[524,525,526,542],"table",{},[527,528,529],"thead",{},[530,531,532,536,539],"tr",{},[533,534,535],"th",{},"Field",[533,537,538],{},"Values",[533,540,541],{},"Default",[543,544,545,567,583,595,608],"tbody",{},[530,546,547,553,565],{},[548,549,550],"td",{},[488,551,552],{},"Acts over",[548,554,555,558,559,558,562],{},[488,556,557],{},"The node",", ",[488,560,561],{},"Rectangle a × b",[488,563,564],{},"Circle d",[548,566,557],{},[530,568,569,577,580],{},[548,570,571,558,574],{},[488,572,573],{},"Width a",[488,575,576],{},"Length b",[548,578,579],{},"Contact dimensions at the surface, for a rectangle",[548,581,582],{},"0.4 m",[530,584,585,590,593],{},[548,586,587],{},[488,588,589],{},"Diameter d",[548,591,592],{},"Contact diameter at the surface, for a circle",[548,594,582],{},[530,596,597,602,605],{},[548,598,599],{},[488,600,601],{},"Spread angle",[548,603,604],{},"Dispersion angle φ",[548,606,607],{},"45°",[530,609,610,615,618],{},[548,611,612],{},[488,613,614],{},"Surfacing",[548,616,617],{},"Thickness of the layers above the slab, in m",[548,619,620],{},"0",[622,623],"kb-figure",{"alt":624,"caption":625,"src":626},"Load properties panel with the Spread on a plate section, beside the slab contour","Load NL1, 80 kN on node N28, with Spread on a plate set to a 0.4 × 0.4 m rectangle at 45° and no surfacing. Beside it, the ULS mₓ contour with the dispersed patch meshed into the slab (lower centre).","\u002Fkb\u002Fpoint-load-spread.png",[21,628,630],{"id":629},"off","Turning it off",[11,632,633,634,636,637,639],{},"Set ",[488,635,552],{}," back to ",[488,638,557],{},". The load acts at one node again, and the\nsingular marker under it returns.",{"title":641,"searchDepth":642,"depth":642,"links":643},"",2,[644,645,646,647,648],{"id":23,"depth":642,"text":24},{"id":468,"depth":642,"text":469},{"id":479,"depth":642,"text":480},{"id":514,"depth":642,"text":515},{"id":629,"depth":642,"text":630},"2026-10-21","A point load on a plate acting over a rectangle or circle, dispersed at 45° to the mid-plane (EN 1991-2 §4.3.6), so the moment under it converges.","md",false,{},true,null,1.5,"\u002Fkb\u002Floads\u002Fpoint-load-contact-area",{"title":6,"description":650},{"loc":657},"kb\u002Floads\u002Fpoint-load-contact-area","KCrpA6q9ZGMh5M8gpqyzBjgeIOh-3ETXiEZzMElpzi8",{"sections":663,"extras":1040,"flat":1053},[664,699,757,780,820,851,894,944,971,998,1013],{"path":665,"slug":666,"title":667,"description":668,"icon":669,"articles":670},"\u002Fkb\u002Fgetting-started","getting-started","Getting started","From an empty tab to a solved, checked structure — the three guides that get you productive in Elementarium.","lucide:rocket",[671,675,679,683,687,691,695],{"path":672,"title":673,"description":674,"translated":654},"\u002Fkb\u002Fgetting-started\u002Fkeyboard-shortcuts","Keyboard shortcuts","Every key binding in the workspace, the pointer gestures in the viewports, what the number fields accept, and what the command palette understands.",{"path":676,"title":677,"description":678,"translated":654},"\u002Fkb\u002Fgetting-started\u002Fquickstart","Quickstart","Build a portal frame, load it, solve it and read the bending moment diagram — about ten minutes from an empty tab.",{"path":680,"title":681,"description":682,"translated":654},"\u002Fkb\u002Fgetting-started\u002Fscope-and-limits","Scope and limits","What Elementarium models, solves and checks today, and what it does not — on one page, before you commit a job to it.",{"path":684,"title":685,"description":686,"translated":654},"\u002Fkb\u002Fgetting-started\u002Fsystem-requirements","System requirements","Which browsers and devices run Elementarium, how threading affects solve speed, and where the practical ceiling on model size comes from.",{"path":688,"title":689,"description":690,"translated":654},"\u002Fkb\u002Fgetting-started\u002Finterface-tour","Tour of the workspace","The ribbon, properties panel, dockable viewports, table dock, command palette, status bar and settings — what each part of the editor is for.",{"path":692,"title":693,"description":694,"translated":654},"\u002Fkb\u002Fgetting-started\u002Funits","Units","How units work in Elementarium — SI inside, your unit system on screen — and the handful of conversions that cause most wrong answers in structural models.",{"path":696,"title":697,"description":698,"translated":654},"\u002Fkb\u002Fgetting-started\u002Ffirst-analysis","Your first analysis","Load cases, combinations and a linear static solve — then how to decide whether the answer is trustworthy.",{"path":700,"slug":701,"title":702,"description":703,"icon":704,"articles":705},"\u002Fkb\u002Fmodeling","modeling","Modeling","Bars, beams, 3D frames, slabs and walls. Geometry, sections, supports and releases that behave like the real structure.","lucide:frame",[706,710,713,717,721,725,729,733,737,741,745,749,753],{"path":707,"title":708,"description":709,"translated":654},"\u002Fkb\u002Fmodeling\u002Fbars-beams-and-trusses","Bars, beams and trusses","When a member should be a bar and when a beam, how to model trusses and bracing, and what to do about members that only work in tension.",{"path":509,"title":711,"description":712,"translated":654},"Column heads","A column or point support acting on a slab over its real footprint, elastic, rigid or stiff, so the moment at the column face converges.",{"path":714,"title":715,"description":716,"translated":654},"\u002Fkb\u002Fmodeling\u002Fdrawings-and-snapping","Drawings & snapping","Importing a DXF as a reference underlay, choosing its units and plane, and snapping model geometry onto it accurately.",{"path":718,"title":719,"description":720,"translated":654},"\u002Fkb\u002Fmodeling\u002Felastic-foundations","Elastic foundations","Grade beams, strip footings and walls on ground as line supports on springs — choosing a subgrade modulus, and where the model stops being true.",{"path":722,"title":723,"description":724,"translated":654},"\u002Fkb\u002Fmodeling\u002Fhinges","Hinges","A hinge anywhere along a member, releases at a node, line hinges on plate edges and beams, connected crossings, scissor hinges, hinge results and export.",{"path":726,"title":727,"description":728,"translated":654},"\u002Fkb\u002Fmodeling\u002Fplane-frames-in-3d","Plane frames in a 3D solver","When to use the 2D Frame and 2D Truss model types, why a flat structure in a 3D model is a mechanism, and how to restrain it.",{"path":730,"title":731,"description":732,"translated":654},"\u002Fkb\u002Fmodeling\u002Fribbed-slabs","Ribbed slabs","Ribs that work with their slab as T-beams — the eccentric web, T-section forces, effective widths to EN 1992, EN 1994, ACI 318 and AISC 360.",{"path":734,"title":735,"description":736,"translated":654},"\u002Fkb\u002Fmodeling\u002Fsections-and-materials","Sections & materials","What a section and a material contribute to the stiffness matrix and the design checks, and the values worth checking twice.",{"path":738,"title":739,"description":740,"translated":654},"\u002Fkb\u002Fmodeling\u002Fsurfaces","Slabs, walls and shells","Modelling surfaces in Elementarium — outlines, openings and thickness, how a beam or a wall attaches to a slab, local axes, and what a surface result means.",{"path":742,"title":743,"description":744,"translated":654},"\u002Fkb\u002Fmodeling\u002Fcopy-paste-and-snap","Snap, copy and paste","Object snap to nodes, midpoints, crossings and plate centres; copying geometry by a base node so the paste joins the model; pasting loads onto targets.",{"path":746,"title":747,"description":748,"translated":654},"\u002Fkb\u002Fmodeling\u002Fstructure-generators","Structure generators","Thirty-six parametric structures — trusses, frames, arches, towers, domes and shells — generated from a few dimensions, with supports and loads.",{"path":750,"title":751,"description":752,"translated":654},"\u002Fkb\u002Fmodeling\u002Fsupports-and-releases","Supports & releases","Pins, fixities, springs and end releases — what each one does to the stiffness matrix, and when each is right.",{"path":754,"title":755,"description":756,"translated":654},"\u002Fkb\u002Fmodeling\u002Ffirst-model","Your first model","The modeling loop end to end — geometry, sections, supports and releases — on a structure small enough to check by hand.",{"path":758,"slug":759,"title":760,"description":761,"icon":762,"articles":763},"\u002Fkb\u002Fmeshing","meshing","Meshing","Mesh density, local refinement and the quality checks that tell you when a mesh is fine enough to trust.","lucide:grid-3x3",[764,768,772,776],{"path":765,"title":766,"description":767,"translated":654},"\u002Fkb\u002Fmeshing\u002Felement-size","Choosing element size","Starting mesh densities for slabs, walls and rafts, and the convergence test that decides whether a mesh is fine enough.",{"path":769,"title":770,"description":771,"translated":654},"\u002Fkb\u002Fmeshing\u002Frefinement","Local refinement","Where to spend elements, where not to bother, and how to refine without wrecking element shape.",{"path":773,"title":774,"description":775,"translated":654},"\u002Fkb\u002Fmeshing\u002Fquality-checks","Mesh quality","Aspect ratio, skew and warping — what degrades a result, what the mesher reports, and how to tell whether the elements you are worried about matter.",{"path":777,"title":778,"description":779,"translated":654},"\u002Fkb\u002Fmeshing\u002Fmesh-refinements","Mesh refinements","Refinement zones tied to the model, round a node or column, along a member or edge, or through a polygon, holding a target element size inside.",{"path":781,"slug":782,"title":783,"description":784,"icon":785,"articles":786},"\u002Fkb\u002Floads","loads","Loads & combinations","Build load cases, generate code combinations automatically and find out which one actually governs.","lucide:arrow-down-to-line",[787,791,795,799,803,807,808,812,816],{"path":788,"title":789,"description":790,"translated":654},"\u002Fkb\u002Floads\u002Fasce-7-combinations","ASCE 7 combinations","LRFD and ASD combinations to ASCE 7-22 — how the generator maps your load groups onto D, L, Lr, S, W and E, and pairing them with the AISC check.",{"path":792,"title":793,"description":794,"translated":654},"\u002Fkb\u002Floads\u002Fcombinations","Automatic combinations","Generating EN 1990 and ASCE 7 combinations, understanding the equations behind them, and reading the generated set critically.",{"path":796,"title":797,"description":798,"translated":654},"\u002Fkb\u002Floads\u002Fenvelopes","Envelopes","Extracting the governing value across dozens of combinations without reading every one — and the traps in doing so.",{"path":800,"title":801,"description":802,"translated":654},"\u002Fkb\u002Floads\u002Fload-cases","Load cases","Actions, self-weight, imposed loads and load arrangements — how to build cases that stay separable.",{"path":804,"title":805,"description":806,"translated":654},"\u002Fkb\u002Floads\u002Fload-panels","Load panels","Areas that hand a floor, roof or wall pressure to the members around them as line loads, one way or two way, without meshing a slab.",{"path":657,"title":6,"description":650,"translated":654},{"path":809,"title":810,"description":811,"translated":654},"\u002Fkb\u002Floads\u002Fsettlements","Support settlements","Prescribed displacements and rotations at supported nodes and line supports, scaled by the combination factor, and why an unsupported direction is ignored.",{"path":813,"title":814,"description":815,"translated":654},"\u002Fkb\u002Floads\u002Ftemperature-loads","Temperature loads","Uniform temperature change and through-depth gradients — what each does to a free and a restrained structure, and the coefficients to use.",{"path":817,"title":818,"description":819,"translated":654},"\u002Fkb\u002Floads\u002Fwind-and-snow","Wind and snow","Wind to EN 1991-1-4 and snow to EN 1991-1-3, generated on a building envelope — site inputs, recognised roof shapes, the cases produced, and the limits.",{"path":821,"slug":822,"title":823,"description":824,"icon":825,"articles":826},"\u002Fkb\u002Fanalysis","analysis","Analysis types","Linear static, modal, linear buckling and second-order — what each analysis assumes, what it returns and how to read the result.","lucide:activity",[827,831,835,839,843,847],{"path":828,"title":829,"description":830,"translated":654},"\u002Fkb\u002Fanalysis\u002Fsolvers","Choosing a linear solver","Conjugate gradients with Jacobi, incomplete Cholesky or multigrid, or a direct factorisation — what each does, how to watch it, and when the choice matters.",{"path":832,"title":833,"description":834,"translated":654},"\u002Fkb\u002Fanalysis\u002Fbuckling","Linear buckling","Critical load factors and buckling shapes — what α_cr means, why it is an upper bound, and how to use it for second-order effects.",{"path":836,"title":837,"description":838,"translated":654},"\u002Fkb\u002Fanalysis\u002Flinear-static","Linear static analysis","The workhorse analysis — what K u = f actually assumes, what it returns, and where linearity stops being a reasonable model.",{"path":840,"title":841,"description":842,"translated":654},"\u002Fkb\u002Fanalysis\u002Fmodal","Modal analysis","Natural frequencies and mode shapes — mass modelling, participation factors and what the numbers are good for.",{"path":844,"title":845,"description":846,"translated":654},"\u002Fkb\u002Fanalysis\u002Fsecond-order","Second-order analysis","P-Δ and P-δ solved by iteration, geometric imperfections to EN 1993-1-1 §5.3, and why a second-order result cannot be superposed.",{"path":848,"title":849,"description":850,"translated":654},"\u002Fkb\u002Fanalysis\u002Fverification","Verifying the solver","Closed-form cases you can build in ten minutes to test the solver — beams, frames, columns, plates, frequencies — with the expected error of each.",{"path":852,"slug":853,"title":854,"description":855,"icon":856,"articles":857},"\u002Fkb\u002Fdesign-checks","design-checks","Design checks","Utilisation ratios, governing cases and the clause behind every number a check reports.","lucide:clipboard-check",[858,862,866,870,874,878,882,886,890],{"path":859,"title":860,"description":861,"translated":654},"\u002Fkb\u002Fdesign-checks\u002Fcold-formed","Cold-formed C and Z members — EN 1993-1-3","Cold-formed C and Z members and purlins to EN 1993-1-3 — the effective section, cross-section and member resistance, purlins held by sheeting, and what is left to you.",{"path":863,"title":864,"description":865,"translated":654},"\u002Fkb\u002Fdesign-checks\u002Fforces-by-hand","Forces entered by hand","Check a member with no analysis or no model, or type over what the analysis gave, and what the row, sheet and report say about it.",{"path":867,"title":868,"description":869,"translated":654},"\u002Fkb\u002Fdesign-checks\u002Fnational-annexes","National annexes","Where nationally determined parameters change the answer, how to select the right annex, and what to state in the report.",{"path":871,"title":872,"description":873,"translated":654},"\u002Fkb\u002Fdesign-checks\u002Fsection-classification","Section classification","How EN 1993-1-1 Table 5.2 classifies a steel section, why the class depends on the combination, and what the check does with a section it cannot classify.",{"path":875,"title":876,"description":877,"translated":654},"\u002Fkb\u002Fdesign-checks\u002Fserviceability","Serviceability checks","Deflection, drift and floor frequency checked member by member at SLS, to the national annexes, EN 1993-1-4, IBC, AISC or EN 1995-1-1.",{"path":879,"title":880,"description":881,"translated":654},"\u002Fkb\u002Fdesign-checks\u002Fstainless","Stainless steel — EN 1993-1-4","Stainless member resistance and deflection to EN 1993-1-4 — how a material is read as stainless, what is checked, and what is left to you.",{"path":883,"title":884,"description":885,"translated":654},"\u002Fkb\u002Fdesign-checks\u002Faisc","Steel — AISC 360","Member strength to Chapters D to H, LRFD or ASD — compression buckling, lateral-torsional buckling and every C_b option written down.",{"path":887,"title":888,"description":889,"translated":654},"\u002Fkb\u002Fdesign-checks\u002Fsteel","Steel — EN 1993-1-1","Member resistance to §6.2 and §6.3 — what is checked at every station, where buckling lengths and M_cr come from, and the clauses left to you — with haunched members, cold-formed C and Z members and fire resistance.",{"path":891,"title":892,"description":893,"translated":654},"\u002Fkb\u002Fdesign-checks\u002Ffire","Steel in fire — EN 1993-1-2","Fire resistance of carbon steel members to EN 1993-1-2 — the steel temperature at the required time, the resistances at that temperature, the critical temperature, and what is left to you.",{"path":895,"slug":896,"title":897,"description":898,"icon":899,"articles":900},"\u002Fkb\u002Freports","reports","Results & reports","Diagrams, contours and tables in the viewport, and the calculation package you hand to a reviewer.","lucide:file-chart-column",[901,905,909,913,917,920,924,928,932,936,940],{"path":902,"title":903,"description":904,"translated":654},"\u002Fkb\u002Freports\u002Fexporting","Exporting a report","Assembling a calculation package a reviewer can follow — inputs, model, results and checks, in the order a calc package should be.",{"path":906,"title":907,"description":908,"translated":654},"\u002Fkb\u002Freports\u002Fifc","IFC structural models","The IFC structural analysis view in and out — what IFC2X3, IFC4 and IFC4X3 files bring, what an export carries, and what IFC cannot say.",{"path":910,"title":911,"description":912,"translated":654},"\u002Fkb\u002Freports\u002Fexchange","Import & export formats","IFC structural models and SAF workbooks in and out, DXF as a reference drawing, result tables as CSV or xlsx, and an OOFEM input deck.",{"path":914,"title":915,"description":916,"translated":654},"\u002Fkb\u002Freports\u002Freading-diagrams","Reading diagrams","Bending, shear and axial diagrams, contour plots and deformed shapes — the conventions behind what you are looking at.",{"path":17,"title":918,"description":919,"translated":654},"Reading singular points","Why the peak at a column, a point load or a re-entrant corner grows with the mesh, how plate results mark those points, and what to do at each.",{"path":921,"title":922,"description":923,"translated":654},"\u002Fkb\u002Freports\u002Freport-formats","Report formats","The report typeset as a PDF with a live preview, as PDF\u002FA-2b for archiving, or as an editable Word file, in English or Czech.",{"path":925,"title":926,"description":927,"translated":654},"\u002Fkb\u002Freports\u002Fresult-tables","Result tables","Filtering, sorting and extracting numbers — getting the value you need out of a solved model without scrolling.",{"path":929,"title":930,"description":931,"translated":654},"\u002Fkb\u002Freports\u002Freviewing","Reviewing a calculation","For the checking engineer — how to interrogate a model you did not build, what the report guarantees, and the questions to ask first.",{"path":933,"title":934,"description":935,"translated":654},"\u002Fkb\u002Freports\u002Fsection-cuts","Section cuts","A line drawn across a slab, the plate result charted along it, and the moment, shear or normal force the line carries, integrated over its length.",{"path":937,"title":938,"description":939,"translated":654},"\u002Fkb\u002Freports\u002Fsmoothing-regions","Smoothing regions","Average, ring fit or face value over a region at a column, point load or corner, applied per load case, for plate design values that converge.",{"path":941,"title":942,"description":943,"translated":654},"\u002Fkb\u002Freports\u002Fviewers","Viewers, colour scales and maps","The viewer strip and switches, the result board, tabs or tiles, linked viewers, legend limits, colour maps and plate results drawn as a 3D surface.",{"path":945,"slug":946,"title":947,"description":948,"icon":949,"articles":950},"\u002Fkb\u002Fcollaboration","collaboration","Collaboration & sync","Shared models, real-time editing, and offline edits that merge cleanly when you reconnect.","lucide:users-round",[951,955,959,963,967],{"path":952,"title":953,"description":954,"translated":654},"\u002Fkb\u002Fcollaboration\u002Fcomments","Comments","Threads pinned to nodes, members, plates or points, @mentions, blocking comments that hold up a report, and the notifications they send.",{"path":956,"title":957,"description":958,"translated":654},"\u002Fkb\u002Fcollaboration\u002Fsharing-projects","Sharing a project","Inviting people to a model, what each role can do, and how to coordinate two engineers in the same structure.",{"path":960,"title":961,"description":962,"translated":654},"\u002Fkb\u002Fcollaboration\u002Fversion-history","Version history","Automatic checkpoints and named versions — how long they are kept, previewing an earlier state, and restoring it in place or as a new project.",{"path":964,"title":965,"description":966,"translated":654},"\u002Fkb\u002Fcollaboration\u002Fdevices","Working across devices","One account on every device — how a project follows you from desk to laptop, tablet or phone, and what changes on a small screen.",{"path":968,"title":969,"description":970,"translated":654},"\u002Fkb\u002Fcollaboration\u002Fworking-offline","Working offline","What keeps working with no connection, what needs one, how a session and a project survive without a signal, and how offline edits merge when you come back.",{"path":972,"slug":973,"title":974,"description":975,"icon":976,"articles":977},"\u002Fkb\u002Ftheory","theory","Theory notes","The mechanics inside the solver — element formulations, sign conventions, numerical assumptions and their limits.","lucide:sigma",[978,982,986,990,994],{"path":979,"title":980,"description":981,"translated":654},"\u002Fkb\u002Ftheory\u002Felement-formulations","Element formulations","Degrees of freedom, interpolation and limits for every element type in the solver — what each one can represent and what it cannot.",{"path":983,"title":984,"description":985,"translated":654},"\u002Fkb\u002Ftheory\u002Fglossary","Glossary","Finite element and structural terms as Elementarium uses them, from degrees of freedom to MITC4 and utilisation, each linked to its page.",{"path":987,"title":988,"description":989,"translated":654},"\u002Fkb\u002Ftheory\u002Fsign-conventions","Sign conventions","Axes, positive directions and how to read a diagram without guessing — the page that prevents most result confusion.",{"path":991,"title":992,"description":993,"translated":654},"\u002Fkb\u002Ftheory\u002Fdirect-stiffness-method","The direct stiffness method","How a finite element solver turns a model into K u = f and back — stiffness, transformation, assembly, constraints, solution and recovery.",{"path":995,"title":996,"description":997,"translated":654},"\u002Fkb\u002Ftheory\u002Fwinkler-foundations","Winkler foundations","The bedding model behind elastic foundations — what it assumes, how to choose a modulus, and precisely where the idealisation stops being true.",{"path":999,"slug":1000,"title":1001,"description":1002,"icon":1003,"articles":1004},"\u002Fkb\u002Ftroubleshooting","troubleshooting","Troubleshooting","Solver errors, unstable models and results that look wrong — with the usual causes listed first.","lucide:life-buoy",[1005,1009],{"path":1006,"title":1007,"description":1008,"translated":654},"\u002Fkb\u002Ftroubleshooting\u002Fsolver-errors","Solver errors","What each class of solver message means, what usually causes it, and what to do next.",{"path":1010,"title":1011,"description":1012,"translated":654},"\u002Fkb\u002Ftroubleshooting\u002Fsingular-stiffness-matrix","Why the solver reports a singular stiffness matrix","The most common solver failure — what singularity means mechanically, the six causes in order of frequency, and how to find yours in minutes.",{"path":1014,"slug":1015,"title":1016,"description":1017,"icon":1018,"articles":1019},"\u002Fkb\u002Faccount","account","Account & billing","Plans, limits, invoices, and what happens to your projects when a subscription ends.","lucide:credit-card",[1020,1024,1028,1032,1036],{"path":1021,"title":1022,"description":1023,"translated":654},"\u002Fkb\u002Faccount\u002Finvoices","Invoices & VAT","Billing details, receipts, VAT handling and how to get an invoice your accounts department will accept.",{"path":1025,"title":1026,"description":1027,"translated":654},"\u002Fkb\u002Faccount\u002Fcancelling","Pausing or cancelling","How to stop paying without losing your work — what happens to projects, reports and history when a subscription ends.",{"path":1029,"title":1030,"description":1031,"translated":654},"\u002Fkb\u002Faccount\u002Fplans","Plans & limits","What the free plan includes, what Pro adds, and how the caps are actually measured.",{"path":1033,"title":1034,"description":1035,"translated":654},"\u002Fkb\u002Faccount\u002Fstudent","Student accounts","A larger free tier for students and researchers — verify an academic email address, what it unlocks, and why it is re-confirmed every year.",{"path":1037,"title":1038,"description":1039,"translated":654},"\u002Fkb\u002Faccount\u002Ftwo-factor","Two-factor authentication","Signing in with an authenticator code as well as your password, recovery codes, turning it off, and Google sign-in on an account that has a password.",[1041,1045,1049],{"path":1042,"title":1043,"description":1044,"translated":654},"\u002Fkb\u002Ffaq","Frequently asked questions","The questions engineers ask before they trust a new structural analysis package — answered directly.",{"path":1046,"title":1047,"description":1048,"translated":654},"\u002Fkb\u002Frelease-notes","Release notes","Every Elementarium release, newest first: what shipped in the tab, and what it changes in your models.",{"path":1050,"title":1051,"description":1052,"translated":654},"\u002Fkb\u002Fall","All articles","Every article in the Elementarium knowledge base, grouped by section.",[1054,1055,1056,1057,1058,1059,1060,1061,1062,1063,1064,1065,1066,1067,1068,1069,1070,1071,1072,1073,1074,1075,1076,1077,1078,1079,1080,1081,1082,1083,1084,1085,1086,1087,1088,1089,1090,1091,1092,1093,1094,1095,1096,1097,1098,1099,1100,1101,1102,1103,1104,1105,1106,1107,1108,1109,1110,1111,1112,1113,1114,1115,1116,1117,1118,1119,1120,1121,1122,1123,1124,1125,1126,1127,1128,1129,1130,1131,1132,1133,1134,1135,1136,1137,1138,1139,1140],{"path":665,"title":667,"description":668,"translated":654},{"path":672,"title":673,"description":674,"translated":654},{"path":676,"title":677,"description":678,"translated":654},{"path":680,"title":681,"description":682,"translated":654},{"path":684,"title":685,"description":686,"translated":654},{"path":688,"title":689,"description":690,"translated":654},{"path":692,"title":693,"description":694,"translated":654},{"path":696,"title":697,"description":698,"translated":654},{"path":700,"title":702,"description":703,"translated":654},{"path":707,"title":708,"description":709,"translated":654},{"path":509,"title":711,"description":712,"translated":654},{"path":714,"title":715,"description":716,"translated":654},{"path":718,"title":719,"description":720,"translated":654},{"path":722,"title":723,"description":724,"translated":654},{"path":726,"title":727,"description":728,"translated":654},{"path":730,"title":731,"description":732,"translated":654},{"path":734,"title":735,"description":736,"translated":654},{"path":738,"title":739,"description":740,"translated":654},{"path":742,"title":743,"description":744,"translated":654},{"path":746,"title":747,"description":748,"translated":654},{"path":750,"title":751,"description":752,"translated":654},{"path":754,"title":755,"description":756,"translated":654},{"path":758,"title":760,"description":761,"translated":654},{"path":765,"title":766,"description":767,"translated":654},{"path":769,"title":770,"description":771,"translated":654},{"path":773,"title":774,"description":775,"translated":654},{"path":777,"title":778,"description":779,"translated":654},{"path":781,"title":783,"description":784,"translated":654},{"path":788,"title":789,"description":790,"translated":654},{"path":792,"title":793,"description":794,"translated":654},{"path":796,"title":797,"description":798,"translated":654},{"path":800,"title":801,"description":802,"translated":654},{"path":804,"title":805,"description":806,"translated":654},{"path":657,"title":6,"description":650,"translated":654},{"path":809,"title":810,"description":811,"translated":654},{"path":813,"title":814,"description":815,"translated":654},{"path":817,"title":818,"description":819,"translated":654},{"path":821,"title":823,"description":824,"translated":654},{"path":828,"title":829,"description":830,"translated":654},{"path":832,"title":833,"description":834,"translated":654},{"path":836,"title":837,"description":838,"translated":654},{"path":840,"title":841,"description":842,"translated":654},{"path":844,"title":845,"description":846,"translated":654},{"path":848,"title":849,"description":850,"translated":654},{"path":852,"title":854,"description":855,"translated":654},{"path":859,"title":860,"description":861,"translated":654},{"path":863,"title":864,"description":865,"translated":654},{"path":867,"title":868,"description":869,"translated":654},{"path":871,"title":872,"description":873,"translated":654},{"path":875,"title":876,"description":877,"translated":654},{"path":879,"title":880,"description":881,"translated":654},{"path":883,"title":884,"description":885,"translated":654},{"path":887,"title":888,"description":889,"translated":654},{"path":891,"title":892,"description":893,"translated":654},{"path":895,"title":897,"description":898,"translated":654},{"path":902,"title":903,"description":904,"translated":654},{"path":906,"title":907,"description":908,"translated":654},{"path":910,"title":911,"description":912,"translated":654},{"path":914,"title":915,"description":916,"translated":654},{"path":17,"title":918,"description":919,"translated":654},{"path":921,"title":922,"description":923,"translated":654},{"path":925,"title":926,"description":927,"translated":654},{"path":929,"title":930,"description":931,"translated":654},{"path":933,"title":934,"description":935,"translated":654},{"path":937,"title":938,"description":939,"translated":654},{"path":941,"title":942,"description":943,"translated":654},{"path":945,"title":947,"description":948,"translated":654},{"path":952,"title":953,"description":954,"translated":654},{"path":956,"title":957,"description":958,"translated":654},{"path":960,"title":961,"description":962,"translated":654},{"path":964,"title":965,"description":966,"translated":654},{"path":968,"title":969,"description":970,"translated":654},{"path":972,"title":974,"description":975,"translated":654},{"path":979,"title":980,"description":981,"translated":654},{"path":983,"title":984,"description":985,"translated":654},{"path":987,"title":988,"description":989,"translated":654},{"path":991,"title":992,"description":993,"translated":654},{"path":995,"title":996,"description":997,"translated":654},{"path":999,"title":1001,"description":1002,"translated":654},{"path":1006,"title":1007,"description":1008,"translated":654},{"path":1010,"title":1011,"description":1012,"translated":654},{"path":1014,"title":1016,"description":1017,"translated":654},{"path":1021,"title":1022,"description":1023,"translated":654},{"path":1025,"title":1026,"description":1027,"translated":654},{"path":1029,"title":1030,"description":1031,"translated":654},{"path":1033,"title":1034,"description":1035,"translated":654},{"path":1037,"title":1038,"description":1039,"translated":654},1794502862184]