Public beta · free to start
Structural analysis that opens like a web page.
Model frames, slabs, walls and shells. Run static, modal, buckling and second-order analysis, and check steel with the clause beside every number. It all runs in a browser tab, on your own processor.
Free plan, no card needed. Nothing to install.
OpenSteel hall
2,353 DoF · 57 ms
OpenConcrete floor
337 DoF · 49 ms
OpenLattice tower
498 DoF · 72 ms
OpenRoad overpass
91,302 DoF · 6.6 s
Four real projects, open in the real editor: orbit them, click a member, switch results. From a 337-DoF floor bay to a 91,302-DoF road bridge solved in 6.6 s, second run.
What each example teachesFrom the first node to the calculation report, in the browser.
Draw the structure, or generate it
Place beams, slabs and walls on a grid, or start from one of 36 parametric structures. Copy a storey and it lands where you click, joined to what it touches. Draw a slab outline and it meshes into shells that solve with the frame around them.
- Trusses, 3D frames, slabs, ribbed slabs, walls and shells
- Hinges anywhere along a member or a plate edge, springs, rigid arms and line supports
- IFC and SAF import (export on Pro), DXF underlays
Drag the load. Watch the slab remesh.
The real engine, compiled to WebAssembly and running in this tab. Move the load or change the element size, and the slab is remeshed and solved again. The times are measured on your machine.
Deflection in mm, downward positive.
- Max. deflection
- – mm
- Max. moment
- sagging– kNm/mhogging– kNm/m
- Estimated error
- –
- Mesh
- – quads
- Last solve, in this tab
- mesh–solve–
50 kN spread evenly over 50 × 50 cm (200 kN/m²); no self-weight.
Supported design codes
What the solver applies today, and what it doesn't. The theory is published, so you can check it.
| Standard | Scope | Status |
|---|---|---|
| EN 1990ULS and SLS combinations | ULS and SLS combinations | Shipping |
| ASCE 7LRFD §2.3 and ASD §2.4 combinations | LRFD §2.3 and ASD §2.4 combinations | Shipping |
| EN 1993-1-1 §6.2–6.4Steel cross-section and member resistance: flexural, torsional and lateral-torsional buckling, 6.61/6.62, built-up members | Steel cross-section and member resistance: flexural, torsional and lateral-torsional buckling, 6.61/6.62, built-up members | Shipping |
| EN 1993-1-1 §6.3.4Haunched and tapered I members: section by section, and the General Method for buckling | Haunched and tapered I members: section by section, and the General Method for buckling | Shipping |
| EN 1993-1-5 §4–6Class 4 effective sections, web shear buckling and transverse forces | Class 4 effective sections, web shear buckling and transverse forces | Shipping |
| EN 1993-1-3Cold-formed C and Z members, and purlins held by sheeting | Cold-formed C and Z members, and purlins held by sheeting | Shipping |
| EN 1993-1-2Fire resistance of steel members: temperature, resistance and critical temperature | Fire resistance of steel members: temperature, resistance and critical temperature | Shipping |
| EN 1993-1-4Stainless steel members: resistance and deflection | Stainless steel members: resistance and deflection | Shipping |
| AISC 360 Ch. D–HSteel members: tension, compression buckling incl. slender elements, flexure with LTB, shear, H1 interaction | Steel members: tension, compression buckling incl. slender elements, flexure with LTB, shear, H1 interaction | Shipping |
| EN 1990 · IBC 1604.3Member deflection at SLS, each limit on its own combination | Member deflection at SLS, each limit on its own combination | Shipping |
| AISC 360 · EN 1990Storey and overall drift, and a floor-frequency screen | Storey and overall drift, and a floor-frequency screen | Shipping |
| EN 1995-1-1 §7.2Timber deflection with creep | Timber deflection with creep | Shipping |
| National annexesNationally determined parameters, set for the project or for one check | Nationally determined parameters, set for the project or for one check | Shipping |
| EN 1992-1-1Concrete design | Concrete design | Not covered |
| EN 1993-1-8Steel connections and base plates | Steel connections and base plates | Not covered |
At your desk and on site.
The same projects on a desktop, laptop, tablet or phone. When someone on site asks for the reaction under column C3, you open the model and read it off.
- Nothing to install on any device. A URL and a sign-in.
- Every edit syncs as you make it. There is no save button.
- Keep working with no signal. Edits merge when you reconnect.
- On Pro, your team works in the same model at the same time.
A phone has fewer cores, so a large model takes longer. Every feature works on every device.


Free to start. Pro for real work.
No licence server and no second seat. Every design module is in the one plan, and you pay only for the months you use it.
Free
US$0
No card needed
- 3 cloud projects
- Models up to 1,000 degrees of freedom
- Every analysis type, every device
- 1 design check per project, any standard
Pro
US$22.99/ month
or US$16.09 a month, billed yearly
- Unlimited projects and model size
- Full calculation reports, no watermark
- Combinations generated to EN 1990 and ASCE 7
- Real-time collaboration with your team
Whatever you're reading this on can already run it.
Chrome · Edge · Firefox · Safari, on desktop, tablet and phone



